The log queue is process-wide. Any server draining it after a request, whether or not its client
called logging/setLevel, could take another session's records; under parallel tests that made
log_records_go_out_as_notifications_once_asked_for flaky.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Each sample can take ~370 KB of texture; 3000 of them could hold about a gigabyte.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
(cherry picked from commit d2daeefb6ef442a472696e78498deeedc03ca823)
A file can hold any number of saved selections; the duplicate-name check and the name lookup were quadratic.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
(cherry picked from commit 9bcb695ad3904565ed84b7562aa99dd818604cec)
Line-end Punctuation Half Width now also spaces Japanese from Latin
letters and digits (JLREQ 3.2.2): a quarter em of the Japanese
characters' size between a kana/kanji (or full-width letter) and a
Latin letter or digit, either way round — 雅楽 2026 年, not 雅楽2026年 —
horizontal and vertical (around sideways Latin).
- Not next to punctuation or symbols, not inside or around a
tate-chu-yoko block (it is set as one Japanese character), and none
left at the end of a line.
- Mojikumi None (older documents, imported text) is unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Choosing a perspective tool shows the grid, but the canvas also re-selected the tool after a
Cmd-drag with the borrowed Selection tool, so a grid hidden with the tool chosen came back after
any Cmd-drag. `Session::switch_tool` (and the app's `restore_tool`) switch without choosing; the
temporary-tool return uses it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The grid was drawn whenever its `visible` flag was set or a perspective
tool was active, and choosing the Perspective Grid tool (Shift+P) didn't set
the flag. So with the tool chosen, View > Perspective Grid > Hide Grid
(perspective.grid.show) turned the hidden flag on instead of off and the
grid stayed on screen however it was toggled.
Choosing a perspective tool now shows the grid (sets `visible`, view state,
no undo step), and the grid, its widget and the Perspective Grid tool's
handles are drawn only while it is visible. Hide Grid hides it with the
tool still chosen; choosing the tool again shows it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
While a tool was busy (a drag in progress) the shortcut handler passed
only Up and Down to it, so the Rectangular and Polar Grid tools never
saw Left/Right, which add and remove columns (radial dividers). All four
arrows now go to the busy tool; the tools that use arrows for something
else (Gradient, Perspective Selection) ignore them while busy.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Parity: Object › Path › Remove Anchor Points now runs the new command (`path.removeAnchors`,
the menu's feature name) instead of `path.deleteAnchors`, which deleted the anchors with their
segments and opened closed paths; that stays the Delete key's command ("Delete Anchor Points",
off the menu). No second "Smart" item.
- Geometry: the refit moves to `vectorcraft_pathops::remove_anchor` on the existing least-squares
fitter (fixed end tangents, a golden-section search for where the curve passes the removed
point) instead of a ~1,000-candidate grid search in geom (about 4 ms per anchor, now well under
0.1 ms). Two straight sides stay one straight side (a rectangle loses a corner and becomes a
triangle), as Illustrator does; non-finite input leaves the handles alone.
- The Delete Anchor Point tool (`path.removeAnchor`) uses the same function, replacing its
heuristic handle stretch; the explicit id/anchor and `fit` params of the new command are dropped
as duplicates of it. The command is enabled by direct-selected anchors (`has_anchors`), not a
UI override.
- The Control bar shows an icon button (the Delete Anchor Point icon, tooltip "Remove Anchor
Points") instead of a 204 pt text button; the labels reuse the translated "Remove Anchor
Points"; zh-hant gains "Delete Anchor Points". The Pen test that pinned Alt-click as plain Pen
(Illustrator's Alt over an anchor is Convert Anchor Point) is dropped.
- Tests for the refit, closed paths, straight sides and bad input; docs/mcp.md and ROADMAP.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
path.smartRemoveAnchor stays. Object › Path, the Control bar, the contextual task bar, Properties, and the canvas context menu run it on direct-selected anchors. The Pen no longer uses Alt/Option for this, so that key stays free for Convert Anchor Point.
- A dragged handle no longer snaps to its own path's bounds and centre, which move with the
handle; the path's anchors are point and alignment targets instead.
- Shift steps 45° from the Constrain Angle preference, like the cut and gradient tools.
- snap_draw and snap_handle share one pixel/grid/smart-guides switch.
- A test that a smooth anchor's opposite handle turns with a Shift-dragged handle and that Alt
still breaks it, and the tools' module docs (both from #338).
Co-authored-by: theironchef <[email protected]>
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Dragging a direction handle with Direct Selection or the Anchor Point tool
sent the pointer position straight to path.setHandle: Shift did nothing and
the handle never snapped, while the Pen already constrains the handles it
pulls out.
guides::snap_handle places a dragged handle: with Shift at a multiple of
45° from its anchor (the Pen's constraint, keeping the dragged length),
otherwise snapped as a drawn point is (smart guides, the grid, pixels).
Both tools use it and show the smart guides while the handle moves.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Rotate, Scale, Move and the other form dialogs opened with no field
focused, so a typed value went nowhere and Enter applied the default (a
Rotate by 0 degrees). The frame a dialog opens on (after the window's
measuring frame), its first text or number field takes the keyboard
focus with its text selected, so typing replaces it and Enter applies
it, as in the reference app.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Use the paint owner, as a dropped swatch does. The Asset Export panel's drop zone uses
the shared art_drop too. Note the new drag and drop in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
artboard.move with copy and artboard.duplicate now make the copy with one helper: a
new id that can't overflow and a name of its own (`<name> copy`, then `<name> copy 2`…,
so two copies of one artboard no longer share a name). `moved` lists the copies a copy
moved rather than the originals it left. Test it with and without moveArt, and note
Alt-drag in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
As in Illustrator, double-clicking an artboard's number goes to it (fits it in the
window) and double-clicking the name renames it. A row's Options button chooses the
Artboard tool on that row's artboard, clicking a row moves the Artboard tool to it
while it is chosen, and an artboard clicked with the Artboard tool becomes the active
one the panel highlights. Note it in the ROADMAP.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Illustrator's Alt-click on a layer's eye hides the other layers and, once they are
hidden, shows every layer again; the lock column does the same with Lock Others and
Unlock All Layers. Reuse the panel menu's commands (one undo step each, named as the
menu items) instead of toggling the row's siblings, so a sublayer's or an object's row
stands for its top-level layer. Document it in the ROADMAP and docs/mcp.md.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The engine kept its own copy of Document::next_layer_name after #353; the
document's now counts sublayers too, so the engine uses it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Art dragged off the canvas and released over the Swatches panel becomes
a pattern swatch of a copy of it (object.pattern.make without entering
pattern editing; the art stays), and over the Brushes panel an Art brush
(brush.new, as the panel's New Brush button makes). A brush dragged out
of the Brushes panel (PanelDrag::Brush, with a preview chip) is applied
to the path it is dropped on (brush.apply). The art drop zone helper
moves to widgets, shared with the Symbols panel.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Brandon Thomas