The two tools had hand-drawn nibs that didn't match the Pen tool's icon and read as distorted
next to it. They now use Lucide's pen-tool (the Pen tool's own icon) with a plus or minus badge,
so the Pen group reads as one family; the Remove Anchor Points buttons pick up the minus one.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Discord feedback: Alt with the Pen didn't move a direction handle on its own, and there was no
way to break a path at an anchor and pull the ends apart.
- Pen: Alt held over a handle end or an anchor of a selected path (the one being drawn too) hands
the gesture to the Anchor Point tool, with the convert cursor: dragging a handle moves it alone,
clicking a smooth anchor makes it a corner, dragging an anchor pulls out symmetric handles.
Drawing goes on afterwards. Handles hidden by a partial anchor selection aren't grabbed.
- path.cutAtAnchors cuts at the direct-selected anchors in one undo step: a closed path opens
there, an open one becomes one path per piece, and one anchor of each cut stays selected so a
drag pulls the path apart. It answers {ids} and refuses (no undo step) when only open ends are
selected. path.convertAnchors checks `to`, skips stale anchor refs instead of indexing past
them, and keeps a smooth anchor's handles when converting to smooth.
- SubPath::cut_at and SubPath::smooth_anchor (geom) now back path.split, path.cutAtAnchors,
path.convertAnchor and path.convertAnchors, replacing three copies of that logic.
- Control bar and Properties panel: "Convert:" corner/smooth and "Anchors:" remove, connect
(Join), cut buttons when anchors are selected; Cut Path on the task bar and the context menu.
New original icon dc-anchor-smooth.svg (ASSETS.md row).
- ja, zh-hans, zh-hant and es strings (cs for the context menu item), es @msg rows; docs/mcp.md
section; ROADMAP.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Illustrator sets a paragraph's direction (Left-to-Right / Right-to-Left
Paragraph Direction in the Paragraph panel, with the Middle Eastern
options) and keeps its alignment buttons physical; it has no automatic
alignment toggle. So:
- ParaStyle.direction (None: from each paragraph's first strong
character, as before; written only when set), the Paragraph panel's two
direction buttons with Show Indic Options (original icons), and
text.setFormat {direction: "auto"|"leftToRight"|"rightToLeft"}. The
layout uses it as the base direction.
- The Automatic alignment check box is gone. Justify::Auto stays as the
start of the paragraph's direction, set on new type only (text.create,
the Type tools, with the mojikumi default in one new_type_para()):
TextObject::point is Left again, so importers (PDF, SVG, DXF, EMF) keep
their own alignment. The alignment buttons show what Auto resolves to.
- Bidi only where there is something right to left: plain paragraphs skip
the algorithm (no per-layout allocation), it runs once per paragraph
(shaping takes the paragraph's levels instead of recomputing them; path
type computed it four times), and the shaper keeps Han, Hiragana,
Katakana and Bopomofo in one segment (splitting at every change of
script cost Japanese text a shaper call per kana-kanji switch).
- Vertical type keeps its logical order, so its glyphs and lines are not
marked right to left (the caret no longer runs backwards down a column).
- PDF import puts Hebrew and Arabic, which PDFs (and VectorCraft's own
export) draw in visual order, back in logical order with the direction
that shows it as drawn; with bidi layout it came back mirrored.
- SVG import pins the direction SVG implies (left to right unless
direction: rtl); SVG export also outlines right-to-left paragraphs.
- Docs (development.md), ROADMAP (folded into the Type entry, Type core
row) and README updated; catalog rows for the new labels.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Five app screenshots retaken from the current build at 2240x1400 (UI at
1.6x): the hero shows the Outer Glow settings in the Appearance panel, the
Live Blends shot shows the new Layers panel rows, and a new shot shows a
two-point Perspective Grid scene (examples/perspective-city.vectorcraft,
built through the command API).
- "A look around" is a 2x2 grid; captions and alt texts follow the shots.
- The "Made in VectorCraft" art is re-rendered with vectorcraft-cli (the
radial Repeat's gradients now turn with each instance).
- Every image is losslessly optimised with oxipng (7.2 MB -> 4.4 MB,
pixel-identical).
- ASSETS.md rows for the new screenshot and example.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Shippori Mincho (assets/fonts, from #145) moves to storytold/craft-fonts. crates/text/build.rs
embeds the fonts of a craft-fonts checkout when CRAFT_FONTS_DIR is set (web: BIZ UDPGothic
Regular only) as vectorcraft_text::CRAFT_FONTS; unset, it is empty and Japanese falls back to the
installed fonts. Document text gets the Japanese faces after the bundled fonts (Mincho first); the
UI adds them at the end of every egui family (BIZ UDPGothic first), before ui_fonts' system-font
discovery. Release and FreeBSD CI builds check craft-fonts out at a pinned commit; packages carry
the fonts' OFL texts.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The issue asked for one-step symmetric shapes, splitting all selected art
along a line and cropping art to a rectangle as real geometry. Only the
freehand Knife and the Scissors existed, and neither works on compound
paths as one shape.
New commands path.mirrorCut, path.lineCut and path.rectCut cut the
selected paths and compound paths (inside groups too) with pathops
booleans against a half-plane or rectangle, and split open paths with
the Knife/Path Eraser helpers. Mirror & Cut reflects the kept half and
unites it with itself (open halves are joined on the axis). The draw2
piece helpers now rebuild compound paths too. Three tools (Eraser group,
original icons) preview the cut live while dragging and commit it as one
undo step; Mirror & Cut's axis and kept side are tool options shown in
the Control bar.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Gradient panel's Stroke buttons now work: with the Stroke proxy on a
linear or radial gradient they lay it within the stroke (placed on the
page, as before), along the path (start to end of each subpath) or across
it (left edge to right edge; inside/outside strokes span their visible
side). `paint.editGradient {stroke: true, strokeMode}` sets it (new art
too with nothing selected); `document.inspect` reports
strokeOptions.gradientMode. Model: StrokeLayer.gradient_mode (default
Within, not written).
Shared geometry in effects::stroke::gradient: ribs on the bisectors of
the flattened path (fans round sharp corners, widened under arrowheads,
following width profiles) cut slices each painted with a linear piece of
the gradient (Gradient::span). The canvas and raster export clip them to
the stroke's outline and arrowheads, grown a pixel and composited with
copy so there are no seams and translucent stops paint once. SVG and PDF
write the same slices clipped to the outline, with a warning (new
vectorcraft_svg::export_with_report). Outline Stroke and Expand make
gradient meshes clipped to the outline. Mesh quads now grow along their
edges so thin quads show no seams. Dashes, profiles and arrowheads keep
working in both modes.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Window > Attributes (Cmd+F11) shows Overprint Fill/Stroke, Show/Don't Show
Center, Reverse Path Direction Off/On, the non-zero / even-odd fill rule,
Image Map, a URL field with recent URLs and a Browser button, and a note.
New commands attributes.set and path.setFillRule; path.reverse takes ids and
reversed; attributes.info reports every value. Objects keep the attributes in
Node.attrs. SVG export wraps linked objects in <a>, and import reads links
back. The canvas draws the centre point of selected objects that show it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Adds LICENSE-MIT, LICENSE-APACHE and docs/brand/LICENSE-brand.txt from the Crafting Apps
licensing standard. NOTICE follows the standard template (copyright, licence, brand carve-out)
and keeps the third-party list, now noting the Feather-derived Lucide icons (also MIT) and the
egui default fonts compiled into the app. ASSETS.md gives the docs/brand/ files their trademark
terms and marks the 21 Feather-derived Lucide icons. README uses the standard License and credits
section; AGENTS.md/CLAUDE.md point to the licence and brand files.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Hollow heads draw as rings (the open arrow as a chevron) and closed paths get
no heads. The stroke stops under each head, so it never shows through a hollow
head or past the tip; stroke.set {arrowAlign: "extend"|"tip"} chooses whether
the tip extends past the end point (default) or sits on it with the stroke
shortened. Line and heads share one paint box (a gradient runs on into the
head) and take the stroke and object opacity once, as one layer on the canvas
and one group in PDF. StrokeLayer.arrow_align is a new defaulted field, so
older files load unchanged. The Stroke panel's Align buttons get two generated
icons and are disabled when the stroke has no head.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- New original DrawCraft mark (gradient + pen nib) replaces the two-letter badge
- render: thumbnails and pattern tiles use a single-threaded context (vello's default is
multithreaded and panics on filters); per-item raster effects detected
- Type tool state no longer leaks across documents
- ui.set {status} for clean screenshots
- README: new hero, feature shots, Made in DrawCraft gallery; examples/neon-drive, ribbons,
feature-sheet; ASSETS.md updated; heading renamed to Crafting Apps
Co-Authored-By: Claude Opus 5.5 <[email protected]>
