krilla's default `simple-text` feature is the only thing that brings in rustybuzz and
ttf-parser, which RustSec lists as unmaintained. The PDF writer places glyphs itself, so the
workspace takes krilla with `raster-images` only; the one test that writes files with
`draw_text` turns `simple-text` on as a dev-dependency feature.
hayro (0.7.2 and 0.8.0 alike) inflates Flate and LZW data with no ceiling, so a few megabytes
of zeros ask for gigabytes, and applies a predictor before checking its parameters: Columns 0
divides by zero (a panic, an abort on the web), a huge Columns allocates a row that large (an
abort everywhere). Both happen inside the reader, before any of our limits.
A file is refused ("a stream in it would decode to more than 256 MB, or its decode parameters
can't be applied") when a stream's decode parameters ask for a predictor the reader can't apply,
or when it decodes past 256 MB through Flate, LZW, run-length and the ASCII encodings before
them, decoded here with a ceiling (only streams large enough to get there are decoded). Every
object's stream is looked at once the file is open (decrypted, references followed), with the
inline images of anything that can be content; object and cross-reference streams, which the
reader decodes while it opens the file, are looked at first in the file's text.
A scatter brush whose art is an instance of a symbol stroked with that brush, or any brush whose
art is painted with a pattern whose tile is stroked with it, drew itself without end: a stack
overflow in a hand-written native file. Brush pieces already strip the brushes of their own
strokes; now what they draw by name that would draw a brushed stroke (a symbol instance, or a
pattern paint, also through the symbols and patterns those use) is left out too, in one place
(`stroke_pieces`, which every renderer and exporter calls with the document).
Probed the rest of item 2 of the depth follow-up with hand-written hostile inputs, kept as tests:
graph designs of deep art and of a symbol holding itself, Affinity groups nested to and past
both of its reader's caps, DXF blocks inserting themselves, EMF/WMF saving states without end,
and plug-in manifests and output nested 30,000 to 100,000 deep. None of them overflowed.
hayro-syntax 0.8.0 reads arrays and dictionaries 64 deep and no deeper wherever they are (the
file's text, object streams, the content of pages, forms, patterns, glyphs and masks), walks the
page tree without recursion and follows a chain of object streams once: what 0.7.2 overflowed
the stack on. hayro-interpret 0.8.0 comes with it (a new device interface: the importer's device
takes it as before). Our raw pre-scan of the file's text and page content goes: the reader's own
cap covers more, and the scan miscounted the bytes of unfiltered binary streams.
What 0.8.0 still builds by recursion with no cap is refused when the file opens: functions and
colour spaces built on themselves or on one another more than 16 deep, and calculator functions
whose procedures nest more than 64 deep. The import runs on a 16 MB thread, as the SVG importer
does.
hayro-syntax 0.8 turns on flate2's zlib-rs backend, which the whole app then deflates with: a
compressed native file is the same gzip stream as before (header and data), but its deflate
blocks now depend on how the data is fed, so the streaming test checks the header and the
unpacked data instead of the bytes.
Every symbol instance was measured as its transform applied to the
20 × 20 square around the origin, which symbols made in the app keep
their art in. The SVG and DXF importers keep symbol art as drawn, so
the box of an instance of an imported symbol did not match its art.
The SVG Star instance at x 20, y 30 draws from (20, 30) to (40, 50)
and was measured from (10, 20) to (30, 40). Align moved such an
instance by the wrong amount, clicks and marquees beside its art
selected it, and the canvas, exports and prints left it out when its
art reached the view or the page and the square did not.
An instance is now measured by its symbol's art, which
Document::symbol_boxes looks up in the document each time
(Node::geometric_bounds_with, visual_bounds_with and
reach_bounds_with). With Use Preview Bounds on, the strokes in the art
count at their own weight, as the canvas draws them, and
object.setBounds counts them at that weight when it sizes an instance
or an object that holds one. When strokes do not scale and a width or
height of 0 or more is smaller than what a path's stroke adds,
object.setBounds now gives the path no width or height, as it does
for an instance whose art has strokes; before, it mirrored the path.
With Use Preview Bounds on, object.setBounds now measures the margins
that strokes add object by object, the members of groups and the
objects in symbol instances' art included, and solves for the width,
height and reference point asked for when the width and height are 0
or more. Before, it measured the margins of the whole selection and
could miss the size or the reference point asked for when strokes did
not scale and the objects' strokes added different margins, and when
strokes scaled and the width and height were out of proportion, even
for one path. A clip group, a Shaper Group, a compound path, type, and
a group or instance with effects or an opacity mask of its own are each
measured as one object, and so is an instance in perspective or one
turned or slanted relative to the bounding box, other than by quarter
turns. When the selection holds more than 4,096 objects to measure this
way, each selected object is measured as one. Instances inside symbol
art are measured by their own symbol's art. An instance is measured as
the square when its symbol is missing, when its symbol or a symbol
nested in its art holds an instance of itself, and when symbols nest 32
deep in its art.
Align and Distribute, the Transform panel, the bounding box and the
selection outline, clicks, the marquee, document.inspect and
document.node, Fit to Artwork Bounds and Fit to Selected Art, canvas
culling, thumbnails, the SVG filter region of an instance with a
raster effect, raster effect images, Export Selection, the SVG of an
artboard, printing, and the PDF, EPS, EMF/WMF and DXF writers use the
new box. The renderer also culls an instance by the effects and
brushed strokes in its art, and it culls a blend, envelope or repeat
by the brush art of what it holds and the effects in the art of the
instances in it. It culls an instance with geometry effects of its own
by the effects in its art after those geometry effects reshape the art.
It measures the effects in a symbol's art once for each symbol and
linear part of the transform that places it. For symbols whose art
holds instances, it measures at most 4,096 placements a frame, and at
most 4,096 more for each pattern tile it rasterizes and each placed
document it draws. Past that, it estimates the reach from the symbol's
reach with no transform, which it measures once. When the drawn
document's symbols change, the renderer drops the cached bounds of the
instances and of the objects that hold them.
The PDF and EPS writers, the SVG of an artboard and Skip Blank
Artboards grow the box of an instance whose art holds brushed strokes
by 16 times the widest stroke (at least 1 pt) of the objects in that
art that have a brushed stroke, plus 8 pt, as the renderer grows the
cull bounds of a brushed path. They keep an instance whose brush art
reaches the page. The SVG of an artboard also keeps an object that
holds an instance when what the canvas paints for it, the effects in
the symbol's art and the instance's own included, reaches the artboard.
Not yet: other commands that measure objects, such as Select › All on
Active Artboard, Transform Each and Convert to Artboards, still measure
an instance by the square.
Docs: docs/mcp.md, docs/target-app-parity.md.
Type on a path is written glyph by glyph, and a stroke added to it as each
glyph's outline stroked right after the glyph. The path in between ended the
line, so each glyph came in as its own text object. Such a stroke, in the
glyph's own paint, is now held with the line and written after it, where it
becomes the type's stroke as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
# Conflicts:
# crates/pdf/src/tests_import_lines.rs
Straight type takes the tracking that keeps its length as the file set
it; type on a path took none, so letter-spaced type on a curve came back
closed up to the font's advances (an "OFFICIAL ISSUED" badge sat to one
side of its band, a condensed title ran off the end of its path). Type on
a path now takes the same tracking, its length measured along the path
from the first glyph to the end of the last.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Both readers skipped a clip of at most six straight segments whose
bounding box contained the page. A diamond touching the page edges has
the page as its bounding box, so its clip was dropped and everything it
cuts away showed. geom::hit::polygon_covers_rect answers it properly
(one convex polygon containing the page's corners); any other path is
kept as a clip.
Fixes#1542
An alpha soft mask's vector art is whitened so its luminance is its
alpha, but images kept their colour: cairo (and so Inkscape) draws a
mask as an image whose alpha is in its own SMask, often black pixels,
so the mask came in empty. While reading an alpha mask's art the
importer now reads images white with their own alpha (under their own
cache key, without the JPEG and CMYK shortcuts), and stencil masks
white; a luminosity mask nested inside reads them as they are.
Fixes#1550
A PDF-compatible .ai keeps its art past the artboard edge unclipped (#646),
and its pages are laid out in a row 36 pt apart. Art that a page draws far
to the left of its artboard (notes beside a design, say) then lay over the
page before it. There it was taken for that page's art: the check against
the editing data found art its layers don't have and opened the file as
its PDF part, without the art outside its artboards, and place_pages left
that art behind when it moved the pages.
Such a page now moves right until its art clears the art before it.
Plain PDFs (clipped to the page) keep the 36 pt gap.
A PDF-compatible .ai opens on its trim boxes, its editor's artboards,
with the bleed boxes round them as the document's bleed (#1349). A PDF
saved with its editing data (#1345) keeps that data under
AIPDFPrivateData keys, which has_illustrator_data didn't look for, so
such a PDF with a bleed still opened on its crop box: the artboard took
the bleed in and the editing data was refused as being for a different
page. has_illustrator_data now finds either key. has_private_data, which
also decides how a page is clipped, is unchanged.
Test: a_file_with_a_bleed_opens_on_its_artboard_with_the_bleed_round_it
(the .ai case, and the same hand-written file with AIPDFPrivateData).
In builds with overflow checks (`cargo run`, `cargo test` and
`cargo xtask ci`), PDF export aborted the process when a number it
wrote rounded to -2,147,483,648 as an f32. pdf-writer 0.15 writes
-2,147,483,648.0 as an integer, and `Limits::register_int` overflows
when it takes the absolute value. krilla 0.8.2's `Surface` then fails
an assertion in its `Drop` while that panic unwinds.
`svg_hostile_markup_never_panics` in `import_fuzz` hit it with type
shifted 2,147,483,649 pt down. Paths, gradients, dash offsets, images
and artboards that far out hit it too, and so does a group around a
stroke wide enough to reach that far. Release builds have no overflow
checks.
PDF export now leaves out art whose coordinates or transform entries
lie beyond 1,000,000,000 in its own space or in the content stream it
is drawn into, and glyph lines whose spacing lies beyond 1,000,000,000
thousandths of an em. That covers paths and clipping paths, glyph
lines, images, gradients, strokes whose width, caps or miter spikes
reach that far, and the art and marks of a page whose artboard lies
that far, which is written blank. A dash offset beyond the bound is
written as its remainder after whole periods of the pattern.
The type's transform is now pushed inside the form that marks a fill
or stroke of type to overprint. The exporter checks what that form
holds through the type's transform, as it checks the same fill or
stroke without overprint.
A PDF saved with the reference app's editing data keeps that data in
streams named AIPDFPrivateData1, AIPDFPrivateData2, ..., where a .ai
file uses AIPrivateData1, AIPrivateData2, .... illustrator_data read
only the .ai names, so such a PDF opened like any other PDF: plain
groups opened ungrouped, and hidden objects and guides were missing. The
import gave no warning that the PDF's editing data went unread.
illustrator_data now reads the AIPDFPrivateData streams when the file
has no AIPrivateData1, and the PDF opens from its editing data as a .ai
file does. editingData: false still opens it like any other PDF.
has_private_data still looks for AIPrivateData keys only.
layered_ai also returns whether it read the layers. When it did, art
reaching past a PDF's page opens whole, and through_editing_data drops
the PDF importer's note that such art was clipped (PAST_PAGE_NOTE, now
public) as it drops the off-artboard note. When it didn't, both notes
stay. On main, a .ai whose editing data can't be decoded or has no
layers opened from its PDF part without the off-artboard note.
testkit::ai::pdf writes the .ai file of testkit::ai::ai with the PDF
key names. The editing-data tests open it as a PDF, and the import fuzz
test opens the damaged sample as a PDF too.
Docs: the document.open params, docs/mcp.md,
docs/file-format-parity.md, docs/gaps.md (G9: the export direction of
#868 remains), one evidence line in docs/target-app-parity.md, and #868
moved from layer structure to editing data in the File formats row of
docs/target-app-parity.md and in docs/roadmap.md.
A PDF-compatible .ai with a bleed writes its PDF part's page as the
artboard grown by the bleed: the crop box takes the bleed in, the trim
box is the artboard and the bleed box the bleed. The importer made the
crop box the artboard, so the bleed opened as more white page with no
bleed guide; and since the editing data's artboard no longer matched
that page, its layers weren't read either ("its editing data is for a
different page").
Opening a PDF-compatible .ai with the crop box (the default) now takes
its trim boxes as the artboards. Any import on the trim boxes (Crop To
› Trim, for a PDF too) sets the document's bleed to how far the bleed
boxes reach past them on each side (ISO 32000-1, 14.11.2), kept to
0–72 pt, and the document read from the editing data keeps it. Art in
the bleed shows outside the artboard, within the bleed guide. Plain
PDFs still open on their crop box by default, and Place is unchanged.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A PDF, and the PDF part of a PDF-compatible .ai, writes a shape filled
with a gradient as a clip followed by a shading fill: the shape, W n,
then sh, which fills the clip's bounds. The importer kept that as a
clip group of the shape (a clipping path) and a rectangle the size of
its bounds filled with the gradient. The Shape Builder skips clipping
paths, so it built its pieces from the rectangles: two overlapping
gradient-filled diamonds gave three rectangles. The Fill swatch showed
? for such a selection, since it held groups.
A clip whose only content is one rectangle covering the clip, filled
with a gradient placed on the page and nothing else, now comes in as
one path: the clip's outline, its subpaths closed, with the
rectangle's fill, opacity, blend mode and mask. It draws as before and
edits like a gradient-filled path drawn in the app. Clips holding
anything else (a flat colour, several objects, a gradient that doesn't
cover the clip, a shading that doesn't extend past its ends) stay clip
groups.
Tests: a diamond clipping a shading imports as one closed path of four
anchors with the linear gradient where it was, and a gradient covering
only part of the diamond or a flat colour stay clipped. Two overlapping
diamonds in a hand-written PDF, clicked on their overlap with the Shape
Builder, give what is left of each (9000 pt² each) and the overlap
diamond (3000 pt²), each with its gradient; main gave three rectangles
of 12000 pt².
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A CMYK page with transparency is drawn through an alpha soft mask that covers the page (a
non-isolated group). Its cover was black: opaque as alpha, but nothing shows in a reader that
takes the mask's luminosity. A white cover is the same mask either way.
Rarely set fields move into one optional boxed NodeExtras, and large NodeKind payloads (images,
live shapes, blends, envelopes) are boxed. Every object, and every undo step that copies it,
shrinks: a 50k-path move keeps ~24.5 MB per step instead of ~40 MB. Files stay byte-identical
(Node keeps its flat JSON through a borrowed Serialize and a from-wire Deserialize, no flatten),
and loading is slightly faster. Undo and redo reuse their step's size estimate instead of
walking the document again (8.3 -> 5.6 ms for a 50k-path move).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
# Conflicts:
# crates/engine/src/cmd/graph.rs
# crates/svg/src/export.rs
History was limited by step count only; a whole-selection move of 50k paths keeps ~40 MB per
step. Steps now carry a size estimate (only unshared subtrees are visited) and the oldest are
dropped beyond a byte budget, keeping the last 8. Documents entering history drop their id
index, selections are shared between steps, the command journal is bounded (held while an
Action records), and document resources are copy-on-write. Saved files are byte-identical.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
Every edit of an object copied its whole appearance (its fills, strokes and effects, about
540 bytes for a basic object) into the new node, though a move leaves it as it is. Over 45
whole-selection moves of 10,000 paths, undo history grew by 589 MB; now 349 MB (41 % less), and
a nudge or a drag of the selection takes 12 ms instead of 15.
- Node::appearance is a vectorcraft_doc::Shared<Appearance>: copy-on-write. A clone shares it,
and the first change through DerefMut copies it (Arc::make_mut). Reads, writes, equality (also
against a plain Appearance) and the saved form are those of the Appearance itself, so call
sites read and change it as before. Sites that build or assign a whole appearance add .into(),
and the few that need a plain copy take (*n.appearance).clone().
- Node::transform changes the appearance only when it has gradients to transform, and pattern
paints are transformed only when there are some: a move no longer copies an appearance it
doesn't change.
The workspace suite (5,301 tests) and clippy pass with the change; the doc and engine suites
pass again after the transform guard.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01VmMmc1J8XeNLxhRihWv9cc
Character tightening and optical kerning space each glyph differently, as
Japanese titles often are. The importer evened a line out with one
tracking value (type on a path took none), leaving glyphs up to an eighth
of an em out of place. When the file's font is installed and one value
can't place every glyph, each character now keeps its own tracking,
measured along the baseline (along the path for type on a path).
Glyphs closed up by up to half an em (the proportional widths of CJK
punctuation) also continue their line instead of starting another.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A .ai or PDF whose spot colours are defined in Lab opened them wrong:
- the PDF part gives such an ink an ICC Lab profile as its alternate
space ([/ICCBased profile], 3 components), which was read as RGB, so
the Lab values were clamped into wildly wrong colours (PANTONE 249 C
came in yellow). A profile whose Alternate is [/Lab ...], or whose
header names the Lab data colour space, is now read as Lab;
- the editing data writes them as `c m y k L a b (name) tint 2 Xx`,
type 2 being Lab, and only the CMYK equivalent was read. Type 2 now
gives the Lab colour, in the swatches and on the art.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A PDF that names a font without embedding it (here a standard Helvetica)
is drawn with a stand-in, so comparing its glyphs with the installed
family's styles picks whichever style happens to look most like the
stand-in: with a large Helvetica family installed, Helvetica became
Helvetica CE Medium (tests_import_fidelity::text_becomes_point_type
failed on such a Mac). Fonts without a font program now keep the face
their name resolves to; embedded fonts are still compared as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01CC5DiGJEZ5ADaQMBEQk4W1
In a PDF (or the PDF part of an .ai file), a glyph of a subset font that
no ToUnicode map, CID table or character map of the font program names
was drawn as outlines, so one text object came in split: "RADA" as the
type "ADA" plus the R's outline.
Such a glyph is now looked for in the installed face of the font's name:
the first character (of those single-byte fonts encode: ASCII, Latin-1,
Latin Extended-A, punctuation, the euro and trade mark signs, fi and fl)
whose glyph draws the same outline, point for point within 2/1000 em,
names it. A subset carries the font's own outlines, so an installed copy
of the same font finds every glyph. Other versions of the font, empty
glyphs and glyphs that are no character still keep their outlines, with
the warning as before. Results are cached per glyph.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The PDF part of an .ai stands in for the editable document, whose art crossing
the artboard edge isn't clipped, so it keeps opening whole and editable (#646).
Plain PDFs still get the clip to the crop box. path_count is back to counting
every path: no clipping paths appear in the .ai cases it counts.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A clip to the page box is dropped as redundant (by hayro, and by
push_clip_path), so art a file hides outside the page - a mock-up backdrop
thousands of points across, say - came in unclipped: it showed, and it sized
Fit to Artwork Bounds and CropTo::Bounding to metres. Viewers show a page
through its crop box, so each object reaching past it now keeps its own clip
to it, with a warning. Art inside the page is unchanged (no clip groups).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The styles were stored on the text and written to SVG's text-decoration,
but the type was drawn without the lines. vectorcraft_text::decorations
now gives each underlined or struck-through stretch of a run on a line
its bar, placed and sized from the font's own underline and strikeout
metrics (with fallbacks for fonts that have none). The canvas, Create
Outlines, PDF export (outlined and real text) and SVG's outlined text
draw them in the run's paint.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A font library can hold two versions of one family and style (a new
Montserrat-Bold.ttf beside an old montserrat.ttf). The font database kept
only the first one loaded, so type set in the other couldn't be matched
when a PDF or .ai was opened: it came in as outlines. Now every version
loads (the first stays the one family and style resolve to), PDF import
tries the other versions when the glyphs differ, and type set in a version
the family and style alone wouldn't pick names it in CharStyle::font_version
(left out when None, so documents without it are unchanged). Layout,
shaping, the substituted-glyph highlight, Find Font, Package and Document
Info follow it; changing the font clears it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The test took the first installed family that isn't bundled and expected its
PDF text to stay live. The PDF doesn't embed the font, so the page draws a
stand-in and text stays live only where the installed font's glyphs match it.
With suitcase fonts now found, the first family on a Mac is a condensed
display face whose glyphs don't, so the importer rightly kept outlines and the
test failed. Which family comes first depends on the machine's fonts: the test
now tries up to 200 families and checks the first that stays live.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
A text matrix that shears the glyphs (type turned and slanted as a whole)
came in as point type turned by the baseline's angle only: the glyphs stood
square on the baseline, so the type drew somewhere else (60 pt type leaning
by 0.25 came back about 10 pt off its outlines). The placement now keeps the
slant (the em's lean along the baseline per unit of its height, the height
measured across the baseline), lines only join glyphs with the same slant,
and the type object's transform shears by it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The PDF writer defaulted to Convert Text to Outlines, so every glyph of
every page became a path: a text-heavy PDF grew several times larger on
export (a 7-page document went from 27 KB to 226 KB) and its text could
no longer be selected or searched. Illustrator's PDF presets embed font
subsets and keep live text; that is now the default too
(advanced.outlineText: false). Outlining stays available as an option,
fonts that can't be embedded still become outlines with a warning, and
printer's marks (page information) are drawn as shapes as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- a story is read once however many text objects name it; the text objects, their pairs with the
page's type, the pieces of a line and a story's size are capped, and over a cap the layers aren't used
- the ASCII85 of the text document is bounded before it is decoded
- joining the pieces of lines that interleave no longer removes the wrong pieces
- a run length too large for the text saturates instead of overflowing
- a dictionary left open at the end of a layer, and layers nested deeper than are read, make the
file one that comes in as its page (they were silently dropped)
- a file whose editing data can't be decoded says so, and the notes about art that was too much or
too far away count as losses, so writing over the source asks first
- the private data of a .ai is inflated under a cap of its own (the PDF reader's decoder has none)
- the other writers (PDF, selection, office, print) ask before replacing a source that lost things,
and a recovered copy remembers that
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
An Illustrator EPS is a flattened page plus, after %%EOF, an editing copy of
the document; a PDF-compatible .ai carries the same in its private data.
Importing only the page lost layer names, order, visibility, hidden layers
and hidden objects and hidden text.
- eps: read the editing copy (Zstandard %AI24_DataStream, older zlib
%AI9_DataStream) into layers, sublayers, groups, compound paths, clip
groups and hidden objects, run by the existing PostScript interpreter.
Falls back to the page, with a warning, when a shown layer uses an
operator that isn't read or the art differs from the page by over 5%.
- eps: read the text document (ate.rs) to place type on hidden layers and
objects; the page's type is matched to the file's text objects by
position (pieces of a line included) and kept with the nearest one when
none claims it. Area type and type on a path are left out with a note.
- pdf/engine: .ai files go through the same reader.
- engine/cli: a file whose import left things out isn't overwritten unless
asked (acknowledgeLoss, --replace-lossy).
- eps: font names re-encoded with a *<n> suffix resolve to their family.
- i18n: es/it/ru for the new import messages; ROADMAP updated.
Container and text-document formats were inferred from user-owned files; the
Adobe file format specification was not read.
Co-Authored-By: Claude Sonnet 5.5 <[email protected]>
A PDF or PDF-compatible .ai whose ToUnicode map gives some glyphs U+FFFD (as
some files do for the digits of an embedded CID font) imported those glyphs as
type showing the replacement character, so every digit came in as "�".
U+FFFD now counts as no mapping. Such a glyph takes its character from the
embedded font where it can (Adobe's CID tables for CID-keyed CFF, as before,
then the font program's own cmap), and otherwise keeps its outline from the
embedded font, so it looks as the file draws it. The import warns which font
had characters the file doesn't name.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
CMYK went to RGB through display sRGB: CMYK -> sRGB (clamped) -> working RGB.
Into a wider space (Wide Gamut RGB, the 1998 primaries) that clipped every
colour sRGB can't hold - CMYK cyan's red channel landed at 99 instead of 0 -
and the black-point compensation setting had no effect (moxcms leaves it
unimplemented). An ICC CMYK profile now converts directly into the RGB
profile: into its primaries with linear curves, where compensation is a
linear remap from the profile's black (found by sending black through the
profile and reading it back), then onto its own curves. The canvas uses the
same conversion into sRGB, so what shows is what an RGB export writes.
Checked against Ghostscript with the same profiles (relative colorimetric,
compensation on and off): exports into Wide Gamut RGB and the sRGB display
agree within 1 level in 255. The built-in CMYK spaces are unchanged (Generic
CMYK compensates in its own model).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A CMYK image with an /SMask, /Mask or colour key was handed to the
interpreter and stored as an RGB PNG, converted with hayro's own bundled
profile (Perceptual) rather than the working CMYK, so it showed 10-30 levels
lighter than other CMYK images and lost its ink amounts. It now keeps its
inks as other CMYK images do (#320), and its alpha becomes a greyscale
opacity mask. PDF export already writes that as a DeviceCMYK image under a
soft mask, so a round trip keeps the inks.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Document symbols placed inline in a run of type (beyond Illustrator; like
InDesign inline anchored objects): TextRun.inline holds the symbol, scale and
shift; the run is one U+FFFC laid out as a glyph sized to the art, centred on
the cap height. text.insertInline and Type > Insert Inline Symbol; editing
keeps the graphic whole; canvas, SVG (<use>) and PDF draw the art; Create
Outlines turns it into a symbol instance.
A `.ai` file's PDF part is what apps that don't read VectorCraft's native
document open. It had no PDF layers: hidden layers and sublayers were left
out of it and everything else was flat page content.
- `.ai` files (Save As, exports, the CLI) write PDF layers unless
`createLayers` is false (a PDF standard still decides for itself).
- createLayers writes sublayers too, as optional content groups listed
under their layer's in `/Order`, hidden ones off with their art.
- A layer's form gets a box round the whole page instead of its art's
bounds, which readers made a clipping group of, gathering a layer's art
and its sublayers' in one group.
- PDF import: art inside a group, clip or form that dissolves into its
parent keeps the layer it was drawn in, so sublayers nested in their
layer's content import as sublayers.
- Save PDF: "Create PDF layers from layers and sublayers" (ja, es, it,
pt-br, ru, zh-hans, zh-hant).
Hidden objects (not layers) still aren't in the PDF part.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
- Type left unfinished when a layer's marked content ends, and a clip that closes in a later layer,
stay in their own layer (no stray "Page N" layer, no art moved to the next layer).
- Top-level layers stack as the pages mark them, so a layer whose art starts on a later page keeps its
place; layers marked with no art come in empty.
- A stroke written as each glyph's outline stroked, right after (or before) the type, becomes the type
object's stroke above (or below) its characters: the type stays one editable object.
- Spaces read from gaps wider than a space get their own tracking where even tracking would put the
glyphs after them more than a tenth of an em off (barcode digit groups); lines are measured to their
last visible glyph, so a wrapped line's trailing space no longer spreads into the tracking.
- Lines wrapped in a frame (each wrapped line ending in a space, one left edge, font, size and leading,
with an optional paragraph spacing) come back as one area type object, left aligned or justified,
only where laying it out breaks the lines exactly where the file does.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
bflatastic