Sony ARWs of cameras without measured colour matrices were edited on the
relative scale (6500 K / 0 = as shot). Their SR2SubIFD stores the
multipliers of the camera's presets at 2500, 3200, 4500, 6000 and 8500 K;
lightcraft_raw::kelvin_presets reads the as-shot multipliers on the curve
through them and they take the spectral matrices' place in the #730
design (as-shot Kelvin and tint only; look, Bradford adaptation and the
pixel-identical legacy upgrade unchanged).
Covered: ILCA-99M2, ILCA-77M2, SLT-A33, DSC-RX10, ILCE-3500, ILCE-7S.
Kelvin-dial shots read back 3400 -> 3396, 5200 -> 5193, 4700 -> 4708,
5600 -> 5594 K; Shade 7493 K. Off-curve constants (isotherm tilt 0.74,
tint spacing 1) measured from the 14 Sony bodies with both spectral
matrices and presets.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Open Library given a Lightroom Classic catalog folder, one of its .lrdata /
.lrcat-data folders, Backups/, the .lrcat or its -wal/-shm/.lock files used to
create an empty LightCraft library inside Lightroom's folder (or, for the
.lrcat file, close the current library and then fail). Now:
- engine: lightroom_folder::lightroom_catalog_at (names only, top-level scan
bounded to 10 000 entries, never fails); Session::open_library refuses those
places with EngineError::LightroomCatalog {path, catalog} before creating
anything. A LightCraft library (catalog.snap / catalog.log) always wins.
- app: app.openLibrary checks before closing the current library, keeps it,
returns {opened: false, lightroomCatalog, path} and shows a dialog with
Import Lightroom Catalog… (file.importLightroom with the catalog found) and
Cancel. The library problem window gets the error instead.
- Lightroom import status keeps the catalog path after the task ends.
- CLI --library explains how to import instead.
Raws without matrices in the file (ARW, NEF, RW2, RAF, CR2, CR3, PEF, SRW,
ORF) were all edited on the relative white-balance scale (6500 K / 0 = as
shot), even when lightcraft_raw::spectral has measured matrices for the
camera. Those 52 bodies (ILCE-7M3, ILCE-7M4, D850, EOS 5D Mark III...) now
edit in Kelvin like a DNG and like Lightroom.
Design:
- One decision on both sides: spectral::find_camera("Make Model") backs
catalog::relative_wb_camera (Photo::relative_wb); files::WbScaleOf decides
the same from the decoded file. A corpus test asserts they agree.
Photo::fitted_look keeps the old predicate for smart previews.
- The matrices only convert: As Shot is the file's multipliers read through
the model's ColorMatrix1/2 (spectral::as_shot_white_through). The look
(JPEG fit / profile / spectral fallback) is unchanged, and the slider
adapts from that white with Bradford. The camera-space rebalance stays
reserved for files with their own matrices.
- Presets resolve to their Kelvin values (WbMode::preset, sources cited).
- The Color panel shows the white balance in effect (effective_wb).
- XMP: crs::Target::for_file takes the camera; matrix cameras read
crs:Temperature as Kelvin (marked "scale": "kelvin"), others keep the
#510 as-shot shift.
Migration (no look changes):
- WhiteBalance.scale: WbScale { Legacy (absent in JSON), Kelvin }. A
white balance without a scale keeps its old meaning. On a spectral-Kelvin
raw (SourceInfo.legacy_relative_wb) the pipeline composes the old
adaptation (6500 -> value) with the new one (as shot -> ...) in Bradford
cone space (local::legacy_white). Von Kries scalings compose exactly, so
the matrix matches to f32 and the pixels are identical
(pipeline legacy_relative_white_balance_renders_as_before_on_a_kelvin_raw,
media old_relative_white_balance_on_a_kelvin_camera_keeps_its_look...).
- Every white-balance writer (develop.set/adjust/quickAdjust/wb/wbPick/
reset) first runs local::normalize_wb: a legacy value becomes the Custom
Kelvin value with the same look and is marked Kelvin. Partials without a
scale (old presets, develop.merge) stay legacy.
- Catalog format 7: Op::SetAsShotWb replaces the 6500/0 as-shot recorded
by older imports when the file is next decoded or reloaded (system op,
not an undo step). Format-version test updated.
- The web wire carries legacy_relative_wb.
Docs: parity (LR-EDIT-COLOR-TEMP), camera-preview-colour, xmp-interop,
lightroom-catalog-import, control-protocol, mcp, whats-new.
A catalog copied from another computer (e.g. Windows to Linux) records
root folders at paths that don't exist here, so every original was
imported as missing. When a root's absolutePath isn't a folder, use the
relativePathFromCatalog Lightroom stores for roots on the catalog's
volume, resolved against the catalog's folder, and report the remapping
as a warning.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A Custom white balance from a Lightroom catalog or XMP sidecar was taken as absolute Kelvin for every
raw. Raws LightCraft develops relative to their as-shot look (ARW, NEF, RW2, RAF, CR3, CR2, PEF; 6500 K
means as shot) then read a small tweak as a large blue shift: ΔE 22 against Lightroom's export on the
photos of issue #510.
The crs mapper now takes a `Target` (preset, rendered, raw with a measured illuminant, relative-WB raw)
instead of a bool. For relative-WB raws, and rendered files with only `Temperature`, a Kelvin value is
converted to the same mired shift from the packet's `AsShotTemperature` / `AsShotTint`. Without that
reference (Lightroom catalogs keep none for Custom photos) the photo stays As Shot and the import
report lists `Temperature, Tint` as not carried over. Import, sidecar read and catalog import decide
the target the same way through `lightcraft_catalog::relative_wb_format`.
Tests: shift from the issue's numbers (3650 → 3578 K lands at ~6275 K), the As Shot fallback with its
report entry, target selection per file, and the catalog mapper's Custom-WB case.
Each photo's develop settings record the rendering process they are
interpreted by (`DevelopSettings::process`). There is one process, V1, the
pipeline as it is; nothing renders differently (180 CPU 8/16-bit and GPU
renders of procedural scenes, and the saved settings JSON and hash64, are
byte-identical to main).
Settings saved without the field load as V1 (a field-level serde default),
new settings get the latest (`Default`), and V1 is left out when saving, so
files and preview-cache keys stay as they were. A damaged value (anything
but a whole number up to 2^32 - 1) reads as V1 too, so it never costs the
rest of the settings (an unparsable `lc:settings` sidecar is ignored). Reset moves a photo to the
latest process, section and slider resets don't; virtual copies inherit
it; copy / paste / sync / Auto Sync / presets don't carry it; a number from
a newer LightCraft is kept and renders with the newest known process. The
process is not an edit (Edited badges, import-look checks). The base tone
map is chosen per process in one place (`finish::base_tone`, shared by CPU
and GPU). Photo > Update to Current Process (`develop.updateProcess`) moves
selected photos on an older process to the latest as one undo step. Its
menu enablement follows the selection; a call that names photos (`ids` /
`id`) is validated on those instead, through a new opt-in
`CommandSpec::explicit_targets` (execute checks enablement before the
handler sees `ids`). `develop.get` reports the process. The rule and how to add V2:
docs/process-versions.md.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
