prop.reset cleared every keyframe before setting the default value. As in
After Effects (and as effect.reset already does for effect parameters), an
animated property now keeps its keyframes and gets the default as a key at
the current time; a static property just takes the default. The expression
is still removed.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Validate saved stroke frames against the current layer limits before clamping a span edit. Keep project and undo state intact when trimming has left strokes outside the layer.
Co-Authored-By: OpenAI Codex <[email protected]>
After Effects 25.4's Quick Offset staggers selected layers, or each
layer's selected keyframes, in the order they were selected: the first
stays, the last moves by the drag and the ones between by equal steps,
landing on subframes.
layer.quickOffset {delta, layers?} moves each layer's start, in and out
point by total * i / (n - 1), worked out once in ticks with integer
arithmetic, so 1 frame over 4 layers gives 0, 1/3, 2/3 and 1 frame
exactly. keys.quickOffset {delta} does the same per layer for the
selected keys, the layers in the order their first key was selected;
every selected key of a layer, across its properties, moves by that
layer's comp-time offset through its start and stretch (reversed too),
keeping values, interpolation, easing and labels. Locked layers are
skipped and at least two layers are needed. With merge and fromStart,
delta is the whole drag and each step starts again from before it, so
the drag is one undo step and a key passed over survives. A delta or a
destination out of the range of times is an error, not a clamped move.
Docs: agents.md; architecture.md notes Quick Offset as the exception to
times snapping to frames.
Viewer: each composition keeps its Resolution in the project, as in After Effects (#417)
# Conflicts:
# crates/ui-egui/src/control.rs
# crates/ui-egui/src/menus.rs
# crates/ui-egui/src/panels/viewer_tools.rs
Dragging the in or out edge of a selected layer's bar now trims every
selected layer by the same delta from its own in/out point, as in After
Effects. layer.timing gains relative inDelta/outDelta params (seconds,
frame-snapped), clamped to the comp start/end and to one frame of layer;
the drag stays one undo step via the merge key.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Problem: on Linux the font list only scanned /usr/share/fonts,
/usr/local/share/fonts, ~/.local/share/fonts and ~/.fonts. The ArtCraft
Launcher installs EffectCraft as a Flatpak, where those folders hold only
the runtime's fonts and the host's fonts live under /run/host, so installed
fonts were missing (25 families instead of 320 on the reporter's setup).
$XDG_DATA_HOME/fonts, $XDG_DATA_DIRS/*/fonts and fontconfig <dir> entries
were never scanned either.
Fix: a new font_dirs module lists the usual folders, the Flatpak host
folders (/run/host/fonts, local-fonts, user-fonts), the XDG data folders
and the <dir>/<remap-dir> entries of the fontconfig configuration
(FONTCONFIG_FILE or /etc/fonts/fonts.conf, /usr/local/etc/fonts/fonts.conf,
and ~/.config/fontconfig), following <include>s with prefix="xdg",
"relative" and ~ expansion. It uses a small tag scanner (no new dependency),
bounds the include depth, the number and size of files read, and reads each
file once. Folders are deduplicated before the walk, and the walk depth
goes from 4 to 8. docs/agents.md lists the folders and how to grant the
Flatpak an extra one.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Problem: ScriptUI controls never sent mouse events to scripts.
addEventListener("mousedown" | "mouseup" | "mousemove" | "mouseover" |
"mouseout" | "click") listeners never ran, so custom-drawn controls
(onDraw + mouse, as DuScriptUI builds them) could not react to the pointer.
docs/plugins.md listed this as missing.
Fix: scriptui.js builds a ScriptUI MouseEvent (clientX/clientY relative to
the target, button, detail = click count, screenX/Y, modifier keys,
getModifierState, stopPropagation, preventDefault) and delivers it in the
capture, target and bubble phases. addEventListener takes the capture flag.
The parent walk is bounded, so a script-made parent cycle cannot hang it.
Each published control lists the mouse events a listener wants
(Widget::mouse, inherited from containers). The new scriptui.mouse
command dispatches one event with clamped, finite values and rejects
unknown types and disabled controls. The egui ScriptUI view hit-tests the
pointer over script windows and docked panels, skipping covered layers and
windows blocked by a modal dialog. It sends mouseover/mouseout,
mousemove, mousedown/mouseup with click counts, and a click carrying the
pointer details in place of the plain click, so a checkbox still toggles
once. Handlers run under the existing script limits; a throwing listener
reports an error and the window keeps working.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Problem: After Effects 26.3's font menu can show only variable fonts.
EffectCraft's font menus (Character panel, Properties ▸ Text) had no such
filter, and text.fonts / MCP list_fonts didn't say which families are
variable.
Fix: the font scan marks a face variable when its table directory has an
fvar table declaring axes (header read only, no extra file loading). The
font menu gets a "Variable fonts only" checkbox above the results; it
combines with the typed search, keeps the keyboard in the search field and
stays set while the app runs. text.fonts reports `variable` per family and
takes `{variable: true}`; list_fonts passes it through. Catalog rows for
ja, zh-Hans, zh-Hant and uk.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
A tool can hand EffectCraft its own font library (a path list) without
installing the fonts system-wide; the folders are scanned like the
system ones.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The UI behaves as in After Effects (the Import dialog's Sequence checkbox
starts off, dropped files are stills, dropped folders make sequences), but
file.import without sequence or drag keeps importing a numbered still's
run, so existing scripts and agents keep working.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
Cause: SequenceOptions::from_params defaulted `sequence` to true for
file.import, so any numbered still (IMG_0001.jpg) brought its whole numbered
run from its folder, and several picked or dropped stills with a common
prefix became one sequence. Dropped files never asked, and the Import
dialog's "<format> Sequence" checkbox started ticked.
Fix, matching After Effects: file.import takes picked and dropped files as
stills unless `sequence: true` (the Import dialog's Sequence checkbox, which
now starts unticked; Force Alphabetical Order implies it), while the numbered
stills inside a picked or dropped folder still import as sequences
(SequenceOptions::folders), and `sequence: false` (Alt-drag of a folder)
imports a folder's files one by one. Replace Footage, reload, proxies and
render outputs keep detecting their sequence (SequenceOptions::default and
from_params are unchanged), and mediaBrowser.import keeps bringing a numbered
still's run unless `sequence: false`. docs/footage.md and docs/agents.md
describe the new defaults.
Tests: sequence import_takes_stills_unless_asked_for_a_sequence and engine
numbered_stills_import_as_stills_by_default (one dropped still and two picked
IMG_ stills stay stills, a dropped folder makes one sequence, the checkbox
brings the run); the existing sequence tests pass `sequence: true`; ui
import_dialog_offers_the_image_sequence_option (unticked by default: a still;
ticked: the run) and a_dropped_folder_imports_as_one_sequence_with_sequence_interpretation
(two dropped frames: two stills; the folder: one sequence).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
(cherry picked from commit aa3c31db9ab3a774ee2f8ba867e1bafc1fce7aba)
- file.relinkFootage (#461): close the params doc so checked execution
(MCP, control channel) rejects unknown keys; translate its menu entry.
- general.language lists Português (Brasil) (#217).
- docs/agents.md: set_property / add_keyframe take timeBase (#522).
- #299's MCP test no longer sends get_property a value.
- The Automatically Reload Footage sequence test uses PNG frames.
- h264_frames_at_reduced_sizes (#507): the bar depends on the fixture's
encoder; 50 dB with ffmpeg 6.1's x264.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Claude-Session: https://claude.ai/code/session_01QiAJeFttZp83Fh7YuzAR5f
What: the Composition panel's Resolution (Auto, Full, Half, Third, Quarter, Custom) is now a
property of the composition (`Comp::resolution`, moved with its `Resolution` type from the UI
into the project crate) instead of one global viewer setting. Switching to another comp shows
that comp's resolution, switching back shows the first one's again, and saving and reopening the
project keeps them. `view.res.full|half|third|quarter|custom` and the new engine command
`view.res.auto` set it (headless too, with an optional `comp`); `ui.set {viewer: {res}}` sets
the active comp's and `ui.inspect` still reports `ui.viewer.res`; `comp.info` reports
`resolution` and `resolutionFactor`; View ▸ Resolution's check marks come from the engine.
Why: After Effects saves each composition's Resolution with the project (CompItem.resolutionFactor
is a per-comp attribute). As there, changing it marks the project modified but adds no undo step:
undo, redo and History jumps carry the current values over to the restored state. It is not part
of the comp's pixels (`Comp::same_pixels` ignores it and `Comp::pixel_form` normalises it), so
changing it keeps the comp's RAM and disk cache keys. Auto is not written (serde default and
skip_serializing_if), so projects saved before open with Auto and older versions read new files.
The magnification is not saved per comp: Adobe's documentation doesn't say it is.
Tests: project `comp_resolution_is_saved_and_old_projects_load_with_auto`,
`resolution_factors_and_scales`; engine
`each_comp_keeps_its_resolution_outside_the_undo_history_and_in_the_file` (switching comps,
no undo step, undo/redo keep it, save/open round trip, menu check marks, Custom dialog);
ui-egui `each_comp_keeps_its_viewer_resolution` (the viewer popup on comp A, comp B through
`ui.set`, back to A, unchanged frame cache identity, save/open). They don't build before the
change (no `Comp::resolution`, no `view.res.auto` engine command).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
What: each property row that can take an expression (it has a stopwatch) now
has a property pick whip in the Parent & Link column, as in After Effects
CC 2018 and later (automation id `timeline.prop.<uid>.propertyPickWhip`).
Dragged onto another property's name or one of its values, it runs
`prop.pickWhip`: the reference is added as the property's expression, or
replaces the one it has, and the expression is enabled. A drop on one value
picks that dimension (`position[1]`).
The parent, expression and property pick whips share one widget and one
drop path (rubber band, autoscroll, dimension pick); only the expression
pick whip inserts at the cursor of an expression being edited.
Pick whips (expression and property) now also drop on properties in
Effect Controls: its property rows register as targets while a pick whip
is dragged, with their per-dimension value fields.
Why: the last part of #363. Adobe's docs say the Property Link pick whip
adds the expression without enabling expressions first, and a pick whip
outside an edit replaces the whole expression text. No modifier keys for
the property pick whip are documented, so none are implemented.
Tests: `the_property_pick_whip_links_a_property_to_another` (ui_inline_edit)
drops it on a property's name, on one of Position's values, on a property
with a disabled expression (replaced and enabled), on an Effect Controls
slider and one value of a point, and on itself (no change). It fails
before the change; with Effect Controls' targets removed it fails at the
slider. Looked at the result with the headless snapshot.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cause: the config reader didn't know ColorSpaceTransform or
ExponentWithLinearTransform and passed colours through them silently.
Blender's Linear Rec.709 -> sRGB therefore stayed in its E-white XYZ
reference space (the blue cast) without the sRGB curve. Display
colorspaces, view transforms, v2 views, looks, AllocationTransform,
BuiltinTransform and .spi1d / .spimtx files were missing too, and
nothing told the user.
Fix (from the OCIO v2 documentation and the CLF "moncurve", not OCIO's
source): ExponentWithLinear, ColorSpace, Look, DisplayView, Allocation
and Builtin transforms (identity, ACES AP0/AP1 matrices, ACEScct /
ACEScc, the sRGB / P3 / Rec.1886 / gamma / PQ displays). RangeTransform
now clamps and takes one-sided ranges. Display colorspaces meet the
scene reference through the default view transform. Added v2 views,
view looks, the looks section and .spi1d / .spi3d / .spimtx files. A
conversion is built once as a flat list of steps (Config::path /
display_path) for both the CPU effect and the GPU colour program (new
moncurve and clamp ops and the ACEScc curve; a program over the
kernel's 255 ops renders on the CPU). Named-transform resolution is
limited to 16 levels and 4096 steps, and YAML nesting to 64 levels, so
hostile or looping configs stop. Transforms that are still unsupported
(Grading Primary / Tone, ACES output, HLG…), unreadable configs and
unknown spaces are now reported: a warning under the effect in Effect
Controls, and the new effect.warning query.
Tests: ocio_config::blender_like_config_converts_linear_rec709_to_srgb
(CST, display colorspaces, v1 / v2 views, allocation, looks, builtin,
range, loops), moncurve_matches_srgb_and_inverts, builtin_styles,
yaml_nesting_is_bounded, ocio::spi_files_parse,
tests_effects::ocio_effect_warns_about_unsupported_config_transforms,
gpu tests_fx_lut::ocio_custom_config_v2 (GPU = CPU).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cause: float footage (OpenEXR, float TIFF) was always sRGB-encoded on
decode, and Interpret Footage could not turn that off, so an OCIO effect
on the layer converted values that were already encoded.
Fix: After Effects' Interpret Footage ▸ Color ▸ Preserve RGB
(Footage::preserve_rgb; file.interpretFootage {"preserveRgb": true}; a
checkbox in the Interpret Footage form; Remember / Apply Interpretation
carry it). The decoder keeps float values linear, and the working-space
conversion from the colour profile and Interpret As Linear Light don't
apply, so the file's values enter the composition unconverted. The media
cache key includes the flag, so both interpretations decode separately.
Tests: pool::preserve_rgb_reads_float_exr_values_unconverted,
tests_color::preserve_rgb_footage_is_not_converted (managed, linearized
and not), tests_proxy::guess_alpha_invert_and_linear_light (command,
render, Apply Interpretation).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Cause: a multi-layer OpenEXR without an unnamed RGB layer showed its
first colour layer unless one was named combined / beauty / rgba. A
Blender compositor File Output names the beauty pass "Image", and its
Cryptomatte layers (lowercase r, g, b, a) sort first, so the picture was
CryptoMaterial00.
Fix: the picture is the unnamed RGB layer, else the beauty pass by the
last part of its name (Combined, Beauty, Image, RGBA, RGB, Color), else
the first colour layer that isn't a data pass (Cryptomatte, depth, mist,
normals, vectors, positions, IDs). A layer without R, G and B shows its
own first channel as grey. After Effects shows a file's main RGBA and
leaves the other layers to EXtractoR, which is unchanged.
Tests: exr_channels::layered_exr_shows_the_beauty_pass_not_cryptomatte
(the reported Blender layout, ViewLayer.Combined, no beauty name,
data-only files).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Right-clicking a property's name in the Timeline did nothing, so
Position's dimensions could be separated only from the Graph Editor.
As in After Effects, it now opens the property's menu: Reset, Edit
Value…, Separate Dimensions (Position and, once separated, X / Y / Z
Position, checked), Add / Remove Expression and Add Property to
Essential Graphics. Only Position separates, as in After Effects
(Scale stays one property).
`prop.reset` without `default` used to leave the value as it was: it
now gives the property its own default (an effect parameter's, or a
Transform property's, shared with Layer ▸ Transform ▸ Reset), which
also makes the Properties panel's Reset reset the values. `prop.set
{layer, prop}` without `value` opens the value dialog, like
`keys.set`.
Tests: timeline_property_names_have_the_property_menu
(ui_blank_context_menus), reset_gives_a_property_its_default (engine).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Dropping the expression pick whip on one of a property's values (the X
of Position) referenced the whole property. As in After Effects, a
drop on one value now picks that dimension: `transform.position[0]`;
a drop on the name still picks the whole property.
`prop.pickWhip` takes `target.dimension`.
The rest of #363 is unchanged: inserting at the cursor landed with
#284, and After Effects' property pick whip in the Parent & Link
column is left for later.
Tests: pick_whip_picks_one_dimension_of_the_target (engine),
the_expression_pick_whip_picks_the_dimension_it_is_dropped_on
(ui_inline_edit).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Time Display Style could only be changed in Project Settings. As in
After Effects, Ctrl-click (Cmd-click on macOS) on the current-time
display of the Timeline or the Composition panel now toggles it between
Timecode and Frames (Feet + Frames goes to Timecode). It runs
`file.projectSettings {timeDisplay}`, so it is one undo step.
Under the Timeline's display the other style shows now (frames under
timecode, timecode under frames), as in After Effects; it always showed
frames.
Tests: ctrl_click_on_the_time_display_toggles_timecode_and_frames
(ui_inline_edit).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
The Ease Presets panel (#254) is modelled on a third-party panel, so,
as with third-party tools in After Effects, it isn't core any more: it
is `extensions/scriptui-panels/Ease Presets.jsx`, a ScriptUI panel
bundled as an optional extension (Window ▸ Ease Presets.jsx), written
only against the public scripting API. Clicking a preset eases every
pair of neighbouring selected keyframes in one undo step (per
dimension, along the motion path for spatial properties, the keys'
other sides as they play); the fields edit the working curve, which the
panel draws; From Keys, Save, Rename and Delete as before. The twelve
built-in curves are unchanged.
Scripting API fixes it needed (After Effects parity):
- `app.settings` lasts between runs (`script_settings.json` in the
settings folder; `script.settings.get` / `script.settings.save`).
- Per-key methods (`setTemporalEaseAtKey`, `setInterpolationTypeAtKey`,
`removeKey`, the continuous / auto-Bezier / roving setters) no longer
change the user's key selection (they selected the key they edited).
- `keyInTemporalEase` / `keyOutTemporalEase` report linear and
auto-Bezier sides as they play, `keyIn/OutSpatialTangent` the
tangents the motion path plays.
- `selectedProperties` includes the properties of selected keyframes.
- `isInterpolationTypeValid` is false for Linear / Bezier on values that
only hold.
Removed from core: Window ▸ Ease Presets, the `keys.easePreset.*`
commands, `engine::ease_presets` and the `ease_presets.json` store,
`keyframe::EaseCurve` (nothing else used it) and the egui panel. User
presets saved by the v0.6.0 panel move into the panel's app.settings
section the first time settings load (the old file is left as is).
Docs: plugins.md (bundled extensions), parity.md, gaps.md G8, agents.md.
Test: app_settings_last_between_runs,
per_key_methods_keep_the_key_selection_and_report_eases_as_they_play,
spatial_tangents_are_reported_as_the_path_plays (each fails before),
the_ease_presets_panel_eases_every_selected_pair_in_one_undo_step,
a_typed_curve_scales_to_each_dimension_and_follows_motion_paths,
user_presets_save_rename_delete_and_persist,
presets_saved_by_the_old_core_panel_carry_over (script, through the
panel's controls), ease_presets_panel_eases_the_selected_keys_from_its_list
(UI: the panel docks and a click on a preset eases the keys).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
After Effects' Interpret Footage has Start Timecode: Use Source File
Timecode, or Override Start, which changes the timecode the footage
shows and leaves its frames alone. The Start Frame field that trimmed or
padded a sequence's head isn't in After Effects, so it is replaced.
Footage.start_timecode (Override Start, in frames at the footage's
rate; None = Use Source, 0 as file timecode isn't read) relabels source
time: the Footage panel's current time and footage.info's `timecode`
count from it. file.interpretFootage takes `overrideStart` and
`startTimecode` (timecode, read at the footage's rate after any frame
rate change, or a frame number, 0 to 1e9). It applies to every footage
with time, not only sequences, and Reload keeps it. A sequence's frames
always run from its first file's number to its last.
Test: start_timecode_only_relabels_source_time (project),
interpret_footage_start_timecode_relabels_source_time (engine: the
reply, the Footage panel's timecode, frame numbers, Use Source, the
footage's rate, bad values, undo), Reload keeps it, and the Interpret
Footage fields in ui_drag_drop.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Effects: effect points on shape layers start at the layer centre (#227)
# Conflicts:
# crates/ui-egui/src/panels/puppet_tool.rs
# crates/ui-egui/src/panels/viewer.rs
#365 rejects arguments missing from a tool's schema; both tools read `id`
as an alias of `command`, so declare it.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
After Effects shows a missing frame of an image sequence as a
placeholder (colour bars) and has no Hold Previous Frame or Skip choice
in Interpret Footage, so EffectCraft doesn't either.
Interpret Footage loses its Missing Frames field, file.interpretFootage
its missingFrames parameter, and Footage its missing_frames setting. A
gap in a numbered sequence's numbering always shows colour bars. A
sequence imported with Force Alphabetical Order still plays its files
one after another (its numbering doesn't count), as in After Effects;
that is now an internal Footage.alphabetical flag, set on import and
kept by Reload. The Interpret Footage note lists the missing frames.
Projects saved before this have no such field and open with the After
Effects behaviour: a sequence with gaps shows placeholders where it
used to close them up.
Test: project sequence unit tests (placeholders, alphabetical order,
projects saved without the flag), tests_sequence (Start Frame instead
of Hold / Skip), sequence_gaps_show_placeholders (media) and the
Interpret Footage fields in ui_drag_drop.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Image sequences were found only by the desktop media prober: one picked
numbered still brought its whole run, with no way to import just that
frame, picking every frame made one sequence item per frame, the browser
couldn't make sequences at all, and a gap in the numbering closed up
silently.
The engine now groups numbered stills itself (engine/src/sequence.rs):
one picked file brings its run from its folder, several picked files of
one run import as that range, a picked or dropped folder imports its
files with each run as a sequence, and Force Alphabetical Order takes
every image of that type in the folder by name. `file.import` takes
`sequence` (default on), `alphabetical` and `frameRate`; Replace Footage,
Reload, proxies and render outputs probe the same way. The media layer
probes one file; the browser lists its file table for the run and
registers every frame with its media pool.
File > Import > File... asks, like After Effects' "PNG Sequence"
checkbox, whether picked numbered stills import as a sequence, with
Force Alphabetical Order and the frame rate. Sequences are named
`shot_[0001-0250].png`.
Interpret Footage gains Missing Frames (Show Placeholder, colour bars as
in After Effects, the new default; Hold Previous Frame; Skip) and Start
Frame (the frame number at the footage's first frame: trims or pads the
head). Saved projects keep Skip, so their sequences play as before.
Form notes keep a readable width and the form fits its rows, so OK stays
in view. docs/footage.md explains importing footage and sequences.
Test: tests_sequence (engine: run, picked range, every frame, Sequence
off, folder, alphabetical, Interpret Footage Missing Frames / Start
Frame, Replace Footage and Reload), project sequence unit tests,
sequence_gaps_show_placeholders_hold_or_close_up (media),
import_dialog_offers_the_image_sequence_option and
dropped_frames_import_as_one_sequence_with_sequence_interpretation (UI).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
EXtractoR's Red, Green, Blue and Alpha are text parameters naming
channels, and Effect Controls drew nothing for text parameters: there
was no way to choose a layer or channel. And a multi-layer OpenEXR file
whose colour is only in named layers (`diffuse.R`, Blender's
`ViewLayer.Combined.R`) didn't import at all: the image decoder wants an
unnamed RGB layer ("does not contain non-deep rgb channels").
- Effect Controls: EXtractoR gets a Layer popup listing the footage's
OpenEXR layers. Picking one sets red, green, blue and alpha to its
channels in one undo step, as After Effects' EXtractoR dialog does (a
one-channel layer such as depth goes in all three colours). Red /
Green / Blue / Alpha are popups of the layer's own R, G, B, A, every
channel of the file, and (none). The lists are read only while open,
so playing an EXR sequence doesn't parse files on the UI thread.
- `layer.channels {layer}` lists a layer's EXR layers and channels and
what each layer shows in red, green, blue and alpha, for agents.
- Media: an EXR without an unnamed RGB layer imports and shows its
colour layer (one named combined, beauty or rgba first); its channels
stay available to EXtractoR and the 3D Channel effects.
- Raster: AuxChannels::layers / layer_rgba and split_channel.
Test: extractor_shows_the_chosen_layer_and_channels_of_a_layered_exr
(host: a layered EXR written with the exr crate imports, layer.channels,
EXtractoR renders spec and depth; it failed to import before),
extractor_offers_the_exr_layers_and_channels (UI: Layer popup, one undo
step, channel popup), layered_exr_without_an_unnamed_rgb_layer_imports
(media).
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Keep serving during long renders, recover failed workers, and remove only files opened by the interrupted export. Cover progress, cancellation, EOF and output ownership with regression tests.
Co-Authored-By: OpenAI Codex <[email protected]>
Co-Authored-By: Claude Opus 5.5 (1M context) <[email protected]>
Brandon Thomas