diff --git a/crates/engine/src/commands/layer.rs b/crates/engine/src/commands/layer.rs
index 787566de..d4cf1d90 100644
--- a/crates/engine/src/commands/layer.rs
+++ b/crates/engine/src/commands/layer.rs
@@ -897,9 +897,13 @@ fn timing(s: &mut Session, p: &Value) -> Result<Value> {
     let fr = s.project.comp(cid).ok_or(EngineError::NoComp)?.frame_rate;
     let snap = |k: &str| f_p(p, k).map(|v| fr.snap_nearest(Tick::from_seconds_f64(v)));
     let (delta, start, inp, outp) = (snap("delta"), snap("start"), snap("in"), snap("out"));
+    // Relative trims: each layer moves its own in/out point by the same amount, so dragging an
+    // edge of several selected layers trims them all together (as in AE).
+    let (in_delta, out_delta) = (snap("inDelta"), snap("outDelta"));
     s.edit("Layer Timing", merge_p(p), |proj, _| {
         let comp = proj.comp_mut(cid).ok_or(EngineError::NoComp)?;
         let fd = comp.frame_duration();
+        let comp_dur = comp.duration;
         for l in comp.layers.iter_mut().filter(|l| ids.contains(&l.id)) {
             let shift = |l: &mut Layer, d: Tick| {
                 l.start_time += d;
@@ -931,6 +935,14 @@ fn timing(s: &mut Session, p: &Value) -> Result<Value> {
                     if let Some(o) = outp {
                         l.out_point = o.max(l.in_point + fd);
                     }
+                    // Stops at the comp start/end (a point already past it doesn't jump onto
+                    // it), keeping at least one frame of layer.
+                    if let Some(d) = in_delta {
+                        l.in_point = (l.in_point + d).max(Tick::ZERO.min(l.in_point)).min(l.out_point - fd);
+                    }
+                    if let Some(d) = out_delta {
+                        l.out_point = (l.out_point + d).min(comp_dur.max(l.out_point)).max(l.in_point + fd);
+                    }
                 }
             }
         }
@@ -1595,7 +1607,7 @@ pub fn specs() -> Vec<CommandSpec> {
             "Layer Timing",
             [],
             None,
-            "{layers?, op?: moveInToTime|moveOutToTime|trimInToTime|trimOutToTime, delta?, start?, in?, out?, merge?}",
+            "{layers?, op?: moveInToTime|moveOutToTime|trimInToTime|trimOutToTime, delta?, start?, in?, out?, inDelta?, outDelta? (seconds, per layer), merge?}",
             has_layers,
             timing
         ),
diff --git a/crates/engine/src/tests_timeline.rs b/crates/engine/src/tests_timeline.rs
index 53ebd52c..009af9e5 100644
--- a/crates/engine/src/tests_timeline.rs
+++ b/crates/engine/src/tests_timeline.rs
@@ -1077,3 +1077,46 @@ fn go_to_time_accepts_a_float_frame_from_the_dialog() {
     let r = s.execute("time.set", json!({"frame": 7})).unwrap();
     assert_eq!(r["frame"], json!(7));
 }
+
+/// Dragging a trim edge with several layers selected trims every selected layer by the same
+/// amount from its own in/out point (as in AE), clamped to the comp and to one frame of layer;
+/// a whole merged drag is one undo step.
+#[test]
+fn relative_trim_moves_every_selected_layer_by_the_same_delta() {
+    let (mut s, a) = setup();
+    let b = s.execute("layer.newSolid", json!({"color": "#ff0000", "width": 100, "height": 100})).unwrap()["layer"].as_u64().unwrap();
+    s.execute("layer.timing", json!({"layers": [a], "in": 0.5, "out": 2.0})).unwrap();
+    s.execute("layer.timing", json!({"layers": [b], "in": 1.0, "out": 3.5})).unwrap();
+    let io = |s: &Session, l: u64| {
+        let l = s.active_comp().unwrap().layer(effectcraft_project::LayerId(l)).unwrap();
+        (l.in_point.seconds(), l.out_point.seconds())
+    };
+    let near = |x: f64, y: f64| (x - y).abs() < 1e-9;
+    let undo_len = s.history.undo.len();
+    // In-point drag in frame steps, merged into one edit.
+    for _ in 0..3 {
+        s.execute("layer.timing", json!({"layers": [a, b], "inDelta": 0.1, "merge": "bar-trim"})).unwrap();
+    }
+    assert_eq!(s.history.undo.len(), undo_len + 1);
+    let ((ai, ao), (bi, bo)) = (io(&s, a), io(&s, b));
+    assert!(near(ai, 0.8) && near(ao, 2.0) && near(bi, 1.3) && near(bo, 3.5), "{ai} {ao} {bi} {bo}");
+    s.execute("edit.undo", json!({})).unwrap();
+    assert!(near(io(&s, a).0, 0.5) && near(io(&s, b).0, 1.0));
+    s.history.merge_key = None;
+    // Out-point drag: b hits the comp end (4 s) while a keeps going.
+    s.execute("layer.timing", json!({"layers": [a, b], "outDelta": 1.0})).unwrap();
+    assert!(near(io(&s, a).1, 3.0) && near(io(&s, b).1, 4.0), "{:?} {:?}", io(&s, a), io(&s, b));
+    // In-point drag left: a stops at the comp start.
+    s.execute("layer.timing", json!({"layers": [a, b], "inDelta": -0.8})).unwrap();
+    assert!(near(io(&s, a).0, 0.0) && near(io(&s, b).0, 0.2), "{:?} {:?}", io(&s, a), io(&s, b));
+    // Trimming past the other edge keeps one frame of layer.
+    s.execute("layer.timing", json!({"layers": [a, b], "inDelta": 10.0})).unwrap();
+    let fd = 1.0 / 30.0;
+    assert!(near(io(&s, a).0, 3.0 - fd) && near(io(&s, b).0, 4.0 - fd), "{:?} {:?}", io(&s, a), io(&s, b));
+    s.execute("layer.timing", json!({"layers": [a, b], "outDelta": -10.0})).unwrap();
+    assert!(near(io(&s, a).1, 3.0) && near(io(&s, b).1, 4.0), "{:?} {:?}", io(&s, a), io(&s, b));
+    // A point already outside the comp trims from where it is instead of jumping onto the edge.
+    s.execute("layer.timing", json!({"layers": [a], "in": -1.0})).unwrap();
+    s.execute("layer.timing", json!({"layers": [a], "inDelta": 0.1})).unwrap();
+    assert!(near(io(&s, a).0, -0.9), "{:?}", io(&s, a));
+}
diff --git a/crates/ui-egui/src/panels/timeline.rs b/crates/ui-egui/src/panels/timeline.rs
index 3a80dbe1..aa597d90 100644
--- a/crates/ui-egui/src/panels/timeline.rs
+++ b/crates/ui-egui/src/panels/timeline.rs
@@ -2135,14 +2135,13 @@ pub fn show(app: &mut EffectcraftApp, ui: &mut egui::Ui, rect: Rect) {
                             if frames != 0 {
                                 acc -= (frames as f64 * fd * pps) as f32;
                                 let d = frames as f64 * fd;
+                                // Moving or trimming a selected layer acts on the whole
+                                // selection; each layer trims from its own in/out point.
+                                let targets = if is_sel { json!(selected.iter().map(|l| l.0).collect::<Vec<_>>()) } else { json!([layer.id.0]) };
                                 let params = match kind {
-                                    "move" => {
-                                        json!({"layers": if is_sel { json!(selected.iter().map(|l| l.0).collect::<Vec<_>>()) } else { json!([layer.id.0]) }, "delta": d, "merge": drag_key})
-                                    }
-                                    "in" => json!({"layers": [layer.id.0], "in": (layer.in_point.seconds() + d).max(0.0), "merge": drag_key}),
-                                    _ => {
-                                        json!({"layers": [layer.id.0], "out": (layer.out_point.seconds() + d).min(comp.duration.seconds()), "merge": drag_key})
-                                    }
+                                    "move" => json!({"layers": targets, "delta": d, "merge": drag_key}),
+                                    "in" => json!({"layers": targets, "inDelta": d, "merge": drag_key}),
+                                    _ => json!({"layers": targets, "outDelta": d, "merge": drag_key}),
                                 };
                                 actions.push(("layer.timing".into(), params));
                             }
diff --git a/docs/agents.md b/docs/agents.md
index 928ddd26..fa9f5488 100644
--- a/docs/agents.md
+++ b/docs/agents.md
@@ -145,7 +145,7 @@ carries outside-range warnings; the existing objects from `keys.set` and `prop.g
 also report both bases and warnings. `prop.get.time` is comp seconds. Separated Position
 `prop.set` retains per-axis replies; for these commands, `path` or `prop` identifies a property, not a group.
 
-Set offsets with `layer.timing {layer, start: 10.5}`; `in`, `out` and `delta` also use comp seconds.
+Set offsets with `layer.timing {layer, start: 10.5}`; `in`, `out` and `delta` also use comp seconds; `inDelta` / `outDelta` trim each layer from its own in/out point.
 For an unstretched layer starting at 10.5 s in a 30 fps comp,
 `prop.addKey {layer: "A", path: "transform/opacity", time: 15.3,
 timeBase: "comp", value: 0}` writes a key at comp 15.3 s (layer 4.8 s), matching
diff --git a/docs/architecture.md b/docs/architecture.md
index 9240193b..bb61c6d5 100644
--- a/docs/architecture.md
+++ b/docs/architecture.md
@@ -391,6 +391,9 @@ their on-screen scale, as text is vector in After Effects; on shape layers and v
 switch is Continuously Rasterize and does the same. Quality: Draft samples
 nearest-neighbour, Wireframe draws the layer bounds. Slip edit (`layer.slip`, Alt+PageUp/Down,
 dragging the source bar in the timeline) moves the source under fixed in/out points.
+Dragging a layer bar's in or out edge with several layers selected trims every selected layer by
+the same amount from its own in/out point (`layer.timing {inDelta | outDelta}`), clamped to the
+comp and to one frame of layer, as one undo step.
 
 **Nested comps** show nothing before they start or after they end (`Comp::covers`), even when
 the precomp layer is trimmed or remapped past them. A comp with **Preserve frame rate when nested