diff --git a/crates/engine/src/guard.rs b/crates/engine/src/guard.rs
index 39a2e6c7..01b647be 100644
--- a/crates/engine/src/guard.rs
+++ b/crates/engine/src/guard.rs
@@ -45,7 +45,8 @@ impl Interactive for Guarded {
     fn prompt(&self, s: &Session) -> Prompt {
         if self.broken.get().is_none() {
             match catch_unwind(AssertUnwindSafe(|| self.inner.prompt(s))) {
-                Ok(p) => return p,
+                // Pending point modifiers (FROM, M2P…) ask for their points in its place.
+                Ok(p) => return s.overlay_prompt(p),
                 Err(_) => self.broken.set(Some("panic in prompt")),
             }
         }
diff --git a/crates/engine/src/lib.rs b/crates/engine/src/lib.rs
index 3020d349..6059bec5 100644
--- a/crates/engine/src/lib.rs
+++ b/crates/engine/src/lib.rs
@@ -13,6 +13,7 @@ pub mod cmd;
 mod finite;
 pub mod grips;
 mod guard;
+pub mod pointmod;
 pub mod prompt;
 pub mod sample;
 pub mod select;
@@ -425,6 +426,8 @@ pub struct Session {
     pub last_command: Option<String>,
     /// LASTPOINT.
     pub last_point: Vec2,
+    /// Point modifiers pending at the current point prompt (`FROM`, `M2P`, `.x`, `<a`…).
+    pub point_mods: Vec<pointmod::Frame>,
     /// Cursor position in world coordinates (from the UI; used for direct distance entry).
     pub cursor: Vec2,
     /// The deferred tangent/perpendicular snap under the cursor, if any (from the UI; lets the
@@ -466,6 +469,7 @@ impl Session {
             log: Vec::new(),
             last_command: None,
             last_point: Vec2::ZERO,
+            point_mods: Vec::new(),
             cursor: Vec2::ZERO,
             cursor_deferred: None,
             viewport_px: (1200.0, 800.0),
@@ -693,6 +697,9 @@ impl Session {
             }
             return Ok(());
         }
+        if !self.point_mods.is_empty() {
+            return self.modifier_input(input);
+        }
         // A deferred snap is only meaningful where the prompt resolves it; elsewhere it is the
         // point it was picked at.
         let input = match input {
@@ -766,7 +773,11 @@ impl Session {
                     Err(_) => Err(EngineError::Internal(run.id.clone(), "panic".into())),
                 }
             }
-            None => run.machine.begin(self),
+            // A command starts with no modifiers pending.
+            None => {
+                self.point_mods.clear();
+                run.machine.begin(self)
+            }
         };
         // Redraw what the command has added so far (LINE adds a segment per point), not only when it ends.
         if let Ok(st) = self.state_mut()
@@ -833,6 +844,7 @@ impl Session {
 
     /// Cancel the running command (Esc). With no command, clears the selection.
     pub fn cancel(&mut self) {
+        self.point_mods.clear();
         if self.running.is_some() {
             let _ = self.feed(Some(Input::Cancel));
         } else {
@@ -928,6 +940,10 @@ impl Session {
         if tt.is_empty() {
             return self.input(Input::Enter);
         }
+        // FROM, M2P, point filters, `<a` (before `'`: `'_from` is a modifier).
+        if let Some(r) = self.typed_modifier(&prompt, tt) {
+            return r;
+        }
         // Transparent command.
         if tt.starts_with('\'') {
             return self.start(tt);
diff --git a/crates/engine/src/pointmod.rs b/crates/engine/src/pointmod.rs
new file mode 100644
index 00000000..0b87923d
--- /dev/null
+++ b/crates/engine/src/pointmod.rs
@@ -0,0 +1,243 @@
+//! Point modifiers typed at a point prompt, as in AutoCAD: `FROM` (a base point and an offset),
+//! `M2P`/`MTP` (the midpoint between two points), the point filters `.x`, `.y`, `.z`, `.xy`,
+//! `.xz`, `.yz` and the angle override `<a`.
+//!
+//! A modifier pushes a [`Frame`] onto [`Session::point_mods`]. While frames are pending the
+//! session shows their prompt ("Base point:", "<Offset>:", "First point of mid:", ".X of",
+//! "(need YZ):") instead of the command's, collects the points they need and finally hands one
+//! point to the command. Every point prompt of every command gets them this way, from the command
+//! line and in scripts alike, and they nest (`FROM` then `M2P`).
+
+use cadcraft_geom::Vec2;
+
+use crate::prompt::{Accept, Input, Prompt};
+use crate::{Result, Session};
+
+/// The most modifiers pending at once (bounds hostile scripts such as `FROM FROM FROM …`).
+const MAX_FRAMES: usize = 32;
+
+/// The coordinates a point filter takes from its first point.
+#[derive(Clone, Copy, Debug, PartialEq, Eq)]
+pub struct Axes {
+    pub x: bool,
+    pub y: bool,
+    pub z: bool,
+}
+
+impl Axes {
+    /// `.x`, `.y`, `.z`, `.xy`, `.xz` or `.yz` (case-insensitive).
+    pub fn parse(t: &str) -> Option<Axes> {
+        let a = match t.to_ascii_lowercase().as_str() {
+            ".x" => (true, false, false),
+            ".y" => (false, true, false),
+            ".z" => (false, false, true),
+            ".xy" => (true, true, false),
+            ".xz" => (true, false, true),
+            ".yz" => (false, true, true),
+            _ => return None,
+        };
+        Some(Axes { x: a.0, y: a.1, z: a.2 })
+    }
+
+    fn letters(self, keep: bool) -> String {
+        [(self.x, 'X'), (self.y, 'Y'), (self.z, 'Z')].iter().filter(|(on, _)| *on == keep).map(|(_, c)| *c).collect()
+    }
+
+    /// The filter as typed: ".XY".
+    pub fn name(self) -> String {
+        format!(".{}", self.letters(true))
+    }
+
+    /// The coordinates still needed: "YZ".
+    pub fn need(self) -> String {
+        self.letters(false)
+    }
+
+    /// The filtered coordinates of `first` with the rest from `second` (Z is not stored: there
+    /// is no 3D yet, so a Z taken from either point is dropped).
+    pub fn combine(self, first: Vec2, second: Vec2) -> Vec2 {
+        Vec2::new(if self.x { first.x } else { second.x }, if self.y { first.y } else { second.y })
+    }
+}
+
+/// A pending point modifier.
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub enum Frame {
+    /// `FROM`: the base point once given, then the offset point.
+    From { base: Option<Vec2> },
+    /// `M2P`/`MTP`: the first point once given, then the second.
+    Mid { first: Option<Vec2> },
+    /// A point filter: the point to take `keep` from once given, then the rest.
+    Filter { keep: Axes, first: Option<Vec2> },
+    /// `<a`: the next point lies on the line through `base` in direction `dir` (a unit vector).
+    Angle { base: Vec2, dir: Vec2 },
+}
+
+/// Strip the international (`_`) and transparent (`'`) prefixes a modifier may be typed with.
+fn bare(t: &str) -> &str {
+    t.trim().trim_start_matches(['\'', '_'])
+}
+
+/// Whether `t` is exactly one of the prompt's keywords (the whole word or its capital-letter
+/// shortcut): a command's own keyword wins over a modifier spelled the same.
+fn exact_keyword(prompt: &Prompt, t: &str) -> bool {
+    prompt.match_keyword(t).is_some_and(|k| {
+        let short: String = k.chars().filter(|c| c.is_ascii_uppercase() || c.is_ascii_digit()).collect();
+        k.eq_ignore_ascii_case(t) || short.eq_ignore_ascii_case(t)
+    })
+}
+
+/// Whether point modifiers apply at this prompt: it asks for a point that is not an object pick.
+pub fn accepts(prompt: &Prompt) -> bool {
+    prompt.accept.point && !prompt.picks_objects()
+}
+
+impl Session {
+    /// The prompt shown while modifiers are pending, built over the command's own prompt.
+    pub(crate) fn overlay_prompt(&self, cmd: Prompt) -> Prompt {
+        let point = Accept::POINT;
+        self.point_mods.iter().fold(cmd, |p, f| match *f {
+            Frame::From { base: None } => Prompt::new("Base point", point),
+            Frame::From { base: Some(b) } => Prompt::new("<Offset>", point).base(b),
+            Frame::Mid { first: None } => Prompt::new("First point of mid", point),
+            Frame::Mid { first: Some(f) } => Prompt::new("Second point of mid", point).base(f),
+            Frame::Filter { keep, first: None } => Prompt::new(format!("{} of", keep.name()), point).base_opt(p.base),
+            Frame::Filter { keep, first: Some(_) } => Prompt::new(format!("(need {})", keep.need()), point).base_opt(p.base),
+            Frame::Angle { .. } => p,
+        })
+    }
+
+    /// The modifier `t` names at `prompt`, if any.
+    fn parse_modifier(&self, prompt: &Prompt, t: &str) -> Option<Frame> {
+        if exact_keyword(prompt, t) {
+            return None;
+        }
+        let b = bare(t);
+        if let Some(a) = b.strip_prefix('<') {
+            // `<a`, `<<a`, `<<<a`, read like the angle of `@d<a`.
+            let angles = self.angle_settings();
+            let ang = if a.starts_with('<') { angles.direction(&format!("<{a}"))? } else { angles.direction(a)? };
+            let dir = Vec2::from_angle(ang);
+            let base = prompt.base.unwrap_or(self.last_point);
+            return (dir.is_finite() && base.is_finite()).then_some(Frame::Angle { base, dir });
+        }
+        if let Some(keep) = Axes::parse(b) {
+            return Some(Frame::Filter { keep, first: None });
+        }
+        match b.to_ascii_lowercase().as_str() {
+            "from" | "fro" => Some(Frame::From { base: None }),
+            "m2p" | "mtp" => Some(Frame::Mid { first: None }),
+            _ => None,
+        }
+    }
+
+    /// A token typed at a point prompt that a modifier handles: a modifier name, or a distance
+    /// along an angle override. `None` leaves the token to the usual parsing.
+    pub(crate) fn typed_modifier(&mut self, prompt: &Prompt, t: &str) -> Option<Result<()>> {
+        if !accepts(prompt) {
+            return None;
+        }
+        if let Some(f) = self.parse_modifier(prompt, t) {
+            if self.point_mods.len() >= MAX_FRAMES {
+                self.echo("Too many point modifiers.");
+                return Some(Ok(()));
+            }
+            if let Frame::Angle { .. } = f {
+                self.echo(format!("Angle Override: {}", bare(t).trim_start_matches('<')));
+            }
+            self.point_mods.push(f);
+            return Some(Ok(()));
+        }
+        if let Some(Frame::Angle { base, dir }) = self.point_mods.last().copied() {
+            // Typed coordinates are explicit: they win over the override.
+            if crate::prompt::parse_point_with(t, self.last_point, &self.angle_settings()).is_some() {
+                self.point_mods.pop();
+                return None;
+            }
+            if let Some(d) = crate::units::parse_distance(t) {
+                self.point_mods.pop();
+                return Some(self.modifier_point(base + dir * d));
+            }
+        }
+        None
+    }
+
+    /// An input while modifiers are pending.
+    pub(crate) fn modifier_input(&mut self, input: Input) -> Result<()> {
+        // An angle override only constrains a point: anything else goes to the prompt below it.
+        if let Some(Frame::Angle { .. }) = self.point_mods.last()
+            && !matches!(input, Input::Point(_) | Input::Deferred(_))
+        {
+            self.point_mods.pop();
+            return self.input(input);
+        }
+        match input {
+            Input::Point(p) => self.modifier_point(p),
+            Input::Deferred(d) => self.modifier_point(d.at),
+            // Enter drops the modifiers and returns to the command's prompt.
+            Input::Enter => {
+                self.point_mods.clear();
+                Ok(())
+            }
+            Input::Cancel => {
+                self.point_mods.clear();
+                self.input(Input::Cancel)
+            }
+            Input::Keyword(_) | Input::Text(_) | Input::Pick(_) => {
+                self.echo("Invalid point.");
+                Ok(())
+            }
+        }
+    }
+
+    /// A point given while modifiers are pending: complete the top frame, and when it has its
+    /// point, hand that to the frame (or command) below.
+    pub(crate) fn modifier_point(&mut self, mut p: Vec2) -> Result<()> {
+        if !p.is_finite() {
+            self.echo("Invalid point.");
+            return Ok(());
+        }
+        while let Some(top) = self.point_mods.pop() {
+            match top {
+                Frame::From { base: None } => {
+                    self.point_mods.push(Frame::From { base: Some(p) });
+                    // `@dx,dy` at "<Offset>:" is measured from the base point.
+                    self.last_point = p;
+                    return Ok(());
+                }
+                Frame::Mid { first: None } => {
+                    self.point_mods.push(Frame::Mid { first: Some(p) });
+                    self.last_point = p;
+                    return Ok(());
+                }
+                Frame::Filter { keep, first: None } => {
+                    self.point_mods.push(Frame::Filter { keep, first: Some(p) });
+                    return Ok(());
+                }
+                // The offset point is already measured from the base (`@` reads the last point).
+                Frame::From { base: Some(_) } => {}
+                Frame::Mid { first: Some(f) } => p = (f + p) * 0.5,
+                Frame::Filter { keep, first: Some(f) } => p = keep.combine(f, p),
+                Frame::Angle { base, dir } => p = base + dir * (p - base).dot(dir),
+            }
+        }
+        self.point_mods.clear();
+        self.feed(Some(Input::Point(p)))
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+
+    #[test]
+    fn filters() {
+        let a = Axes::parse(".X").unwrap();
+        assert_eq!((a.name().as_str(), a.need().as_str()), (".X", "YZ"));
+        assert_eq!(a.combine(Vec2::new(1.0, 2.0), Vec2::new(3.0, 4.0)), Vec2::new(1.0, 4.0));
+        let a = Axes::parse(".yz").unwrap();
+        assert_eq!((a.name().as_str(), a.need().as_str()), (".YZ", "X"));
+        assert_eq!(a.combine(Vec2::new(1.0, 2.0), Vec2::new(3.0, 4.0)), Vec2::new(3.0, 2.0));
+        assert!(Axes::parse(".5").is_none() && Axes::parse(".w").is_none());
+    }
+}
diff --git a/crates/engine/src/prompt.rs b/crates/engine/src/prompt.rs
index dd8ea770..112c1807 100644
--- a/crates/engine/src/prompt.rs
+++ b/crates/engine/src/prompt.rs
@@ -150,7 +150,9 @@ pub trait Interactive: Send {
     }
 }
 
-/// Parse a typed point: `x,y[,z]`, `@dx,dy`, `@dist<angle`, `dist<angle`, `#x,y` (absolute).
+/// Parse a typed point: `x,y[,z]`, `@dx,dy`, `@dist<angle`, `dist<angle`, `#x,y` (absolute),
+/// `*x,y` and `*@dx,dy`/`@*dx,dy` (world coordinates: the same as the plain forms, as there is no
+/// UCS yet).
 /// Relative forms use `last`. Polar angles read the default angle settings (degrees from +X,
 /// counterclockwise); `parse_point_with` reads a drawing's.
 pub fn parse_point(text: &str, last: Vec2) -> Option<Vec2> {
@@ -164,8 +166,10 @@ pub fn parse_point_with(text: &str, last: Vec2, angles: &crate::units::AngleSett
     if t.is_empty() {
         return None;
     }
+    let t = t.strip_prefix('*').map_or(t, str::trim_start);
     let (rel, body) = if let Some(b) = t.strip_prefix('@') {
-        (true, b.trim())
+        let b = b.trim();
+        (true, b.strip_prefix('*').map_or(b, str::trim_start))
     } else if let Some(b) = t.strip_prefix('#') {
         (false, b.trim())
     } else {
@@ -209,6 +213,10 @@ mod tests {
         assert!(parse_point("5<0", last).unwrap().near(Vec2::new(5.0, 0.0), 1e-9));
         assert_eq!(parse_point("#1,1", last), Some(Vec2::new(1.0, 1.0)));
         assert_eq!(parse_point("@", last), Some(last));
+        assert_eq!(parse_point("*3,4", last), Some(Vec2::new(3.0, 4.0)));
+        assert_eq!(parse_point("*@1,2", last), Some(Vec2::new(11.0, 12.0)));
+        assert_eq!(parse_point("@*1,2", last), Some(Vec2::new(11.0, 12.0)));
+        assert_eq!(parse_point("*", last), None);
         assert_eq!(parse_point("1", last), None);
         assert_eq!(parse_point("a,b", last), None);
         assert_eq!(parse_point("1,2,3,4", last), None);
diff --git a/crates/engine/tests/point_modifiers.rs b/crates/engine/tests/point_modifiers.rs
new file mode 100644
index 00000000..8155bffe
--- /dev/null
+++ b/crates/engine/tests/point_modifiers.rs
@@ -0,0 +1,133 @@
+//! Point modifiers at point prompts (#392): FROM, M2P/MTP, point filters, the `*` prefix and the
+//! angle override `<a`, from the command line and in scripts.
+
+use cadcraft_doc::EntityKind;
+use cadcraft_engine::{Input, Session};
+use cadcraft_geom::Vec2;
+
+/// The lines of model space as (start, end).
+fn lines(s: &Session) -> Vec<(Vec2, Vec2)> {
+    s.doc().unwrap().model.iter().filter_map(|e| if let EntityKind::Line(l) = &e.kind { Some((l.a.xy(), l.b.xy())) } else { None }).collect()
+}
+
+fn line_is(l: Option<&(Vec2, Vec2)>, a: (f64, f64), b: (f64, f64)) -> bool {
+    l.is_some_and(|(p, q)| p.near(Vec2::new(a.0, a.1), 1e-9) && q.near(Vec2::new(b.0, b.1), 1e-9))
+}
+
+#[test]
+fn from_takes_a_base_point_and_an_offset() {
+    let mut s = Session::new();
+    s.cmdline("line from").unwrap();
+    assert!(s.prompt_text().ends_with("Base point:"), "{}", s.prompt_text());
+    s.cmdline("10,10").unwrap();
+    assert!(s.prompt_text().ends_with("<Offset>:"), "{}", s.prompt_text());
+    assert_eq!(s.current_prompt().unwrap().base, Some(Vec2::new(10.0, 10.0)), "rubber band from the base point");
+    s.cmdline("@5,0").unwrap();
+    assert!(s.prompt_text().contains("Specify next point"), "back at the command's prompt: {}", s.prompt_text());
+    s.cmdline("@0,5").unwrap();
+    s.cmdline("").unwrap();
+    assert!(line_is(lines(&s).first(), (15.0, 10.0), (15.0, 15.0)), "{:?}", lines(&s));
+
+    // Any command's point prompt takes it: the centre of a circle 3,4 from the origin.
+    s.cmdline("circle from 0,0 @3,4 2").unwrap();
+    let Some(EntityKind::Circle(c)) = s.doc().unwrap().model.iter().last().map(|e| e.kind.clone()) else { panic!("no circle") };
+    assert!(c.center.xy().near(Vec2::new(3.0, 4.0), 1e-9) && (c.radius - 2.0).abs() < 1e-9);
+}
+
+#[test]
+fn m2p_and_mtp_give_the_midpoint_between_two_points() {
+    let mut s = Session::new();
+    s.cmdline("line m2p").unwrap();
+    assert!(s.prompt_text().ends_with("First point of mid:"), "{}", s.prompt_text());
+    s.cmdline("0,0").unwrap();
+    assert!(s.prompt_text().ends_with("Second point of mid:"), "{}", s.prompt_text());
+    s.cmdline("10,4").unwrap();
+    s.cmdline("_mtp 20,0 20,20").unwrap();
+    s.cmdline("").unwrap();
+    assert!(line_is(lines(&s).first(), (5.0, 2.0), (20.0, 10.0)), "{:?}", lines(&s));
+}
+
+#[test]
+fn point_filters_take_coordinates_from_two_points() {
+    let mut s = Session::new();
+    s.cmdline("line 0,0 .x").unwrap();
+    assert!(s.prompt_text().ends_with(".X of:"), "{}", s.prompt_text());
+    s.cmdline("7,99").unwrap();
+    assert!(s.prompt_text().ends_with("(need YZ):"), "{}", s.prompt_text());
+    s.cmdline("3,4").unwrap();
+    s.cmdline(".Y 99,6").unwrap();
+    s.input(Input::Point(Vec2::new(1.0, 99.0))).unwrap();
+    s.cmdline(".xy 8,9 0,0,5").unwrap();
+    s.cmdline("").unwrap();
+    let l = lines(&s);
+    assert!(line_is(l.first(), (0.0, 0.0), (7.0, 4.0)), "{l:?}");
+    assert!(line_is(l.get(1), (7.0, 4.0), (1.0, 6.0)), "{l:?}");
+    assert!(line_is(l.get(2), (1.0, 6.0), (8.0, 9.0)), "{l:?}");
+}
+
+#[test]
+fn star_prefix_reads_world_coordinates() {
+    let mut s = Session::new();
+    s.cmdline("line *1,1 *@2,0 @*0,3").unwrap();
+    s.cmdline("").unwrap();
+    let l = lines(&s);
+    assert!(line_is(l.first(), (1.0, 1.0), (3.0, 1.0)) && line_is(l.get(1), (3.0, 1.0), (3.0, 4.0)), "{l:?}");
+}
+
+#[test]
+fn angle_override_locks_the_direction_of_the_next_point() {
+    let mut s = Session::new();
+    s.cmdline("line 1,1 <90").unwrap();
+    assert!(s.log.iter().any(|l| l == "Angle Override: 90"), "{:?}", s.log);
+    assert!(s.prompt_text().contains("Specify next point"), "the command's prompt stays: {}", s.prompt_text());
+    // A typed distance runs along the locked angle.
+    s.cmdline("5").unwrap();
+    // A picked point is brought onto the locked line.
+    s.cmdline("<0").unwrap();
+    s.input(Input::Point(Vec2::new(4.0, 9.0))).unwrap();
+    // The lock lasts one point only.
+    s.input(Input::Point(Vec2::new(4.0, 9.0))).unwrap();
+    s.cmdline("").unwrap();
+    let l = lines(&s);
+    assert!(line_is(l.first(), (1.0, 1.0), (1.0, 6.0)), "{l:?}");
+    assert!(line_is(l.get(1), (1.0, 6.0), (4.0, 6.0)), "{l:?}");
+    assert!(line_is(l.get(2), (4.0, 6.0), (4.0, 9.0)), "{l:?}");
+
+    // A keyword after an override goes to the command (Undo the last segment).
+    s.cmdline("line 0,0 5,0 <45 u").unwrap();
+    s.cmdline("").unwrap();
+    assert_eq!(lines(&s).len(), 3, "the segment was undone");
+}
+
+#[test]
+fn modifiers_nest_and_work_in_scripts() {
+    let mut s = Session::new();
+    // FROM whose base point is the midpoint of 0,0 and 10,0, then an offset of @0,3.
+    s.script("LINE FROM M2P 0,0 10,0 @0,3\n20,3\n\n").unwrap();
+    assert!(s.running.is_none());
+    assert!(line_is(lines(&s).first(), (5.0, 3.0), (20.0, 3.0)), "{:?}", lines(&s));
+
+    // One token per line as well.
+    s.script("LINE\n_from\n0,0\n@1,1\n.y\n0,5\n2,0\n\n").unwrap();
+    assert!(line_is(lines(&s).get(1), (1.0, 1.0), (2.0, 5.0)), "{:?}", lines(&s));
+}
+
+#[test]
+fn enter_drops_the_modifiers_and_text_is_not_a_point() {
+    let mut s = Session::new();
+    s.cmdline("line from").unwrap();
+    s.cmdline("hello").unwrap();
+    assert!(s.log.iter().any(|l| l == "Invalid point."));
+    assert!(s.prompt_text().ends_with("Base point:"));
+    s.cmdline("").unwrap();
+    assert!(s.running.is_some(), "LINE still runs");
+    assert!(s.prompt_text().contains("Specify first point"), "{}", s.prompt_text());
+    assert!(s.point_mods.is_empty());
+    // Esc cancels the command and the modifiers with it.
+    s.cmdline("m2p").unwrap();
+    s.cancel();
+    assert!(s.running.is_none() && s.point_mods.is_empty());
+    // A runaway script can't pile up modifiers without bound.
+    s.cmdline(&format!("line{}", " from".repeat(100))).unwrap();
+    assert!(s.point_mods.len() <= 32);
+}
diff --git a/docs/gaps.md b/docs/gaps.md
index 4af8bc88..67f816e5 100644
--- a/docs/gaps.md
+++ b/docs/gaps.md
@@ -21,7 +21,7 @@ do them first.
 | 6 | **Ellipse and spline geometry is tessellated** (intersections, offsets, closest points; polyline offset ignores bulges) | Coordinates are subtly wrong; offsets of ellipses come out as polylines | 30–50 | [geometry](geometry-parity.md) |
 | 7 | **[alpha blocker]** **No xrefs, block editor, dynamic blocks or groups** | Most production drawings use them | 80–120 | [features](#features) |
 | 8 | **No autosave, crash recovery, AUDIT or RECOVER** | Work is lost if anything goes wrong; damaged files can't be repaired | 10–15 | [features](#features) |
-| 9 | **Dynamic input lacks grip input; no FROM/M2P/TK/point filters; grip options ignored** | Precision entry at the cursor is how AutoCAD is taught today | 15–25 | [ui](ui-parity.md) |
+| 9 | **Dynamic input lacks grip input; no TK; grip options ignored** (FROM, M2P/MTP, point filters, `*` and `<a` landed, #392) | Precision entry at the cursor is how AutoCAD is taught today | 12–20 | [ui](ui-parity.md) |
 | 10 | **No CI runs the Rust tests on pull requests** (`cargo fmt` on main is fixed) | open PRs land without a gate; regressions go unseen | 2–3 | [stability](#stability) |
 
 ## Features
@@ -62,7 +62,7 @@ Detail and evidence: [ui-parity.md](ui-parity.md).
 |---|---|---|---|
 | U1 | **[alpha blocker]** Object snap tracking (acquire points, alignment paths); Extension and Parallel snaps; true apparent intersection | High | 8–12 |
 | U2 | Dynamic input: grip dimensional input, lock icons, DYNPROMPT options menu (pointer boxes with Tab and relative entry landed in #60) | Medium | 3–5 |
-| U3 | **[alpha blocker]** FROM, M2P/MTP, TK, `.x/.y/.xy` point filters, `*` WCS prefix, angle override `<a` | High | 4–6 |
+| U3 | **[alpha blocker]** TK (temporary tracking, comes with object snap tracking, U1). FROM, M2P/MTP, `.x/.y/.xy` point filters, the `*` WCS prefix and the angle override `<a` landed at every point prompt (#392) | High | 1–2 |
 | U4 | **[alpha blocker]** Typed snap overrides (`END`, `MID` … at a prompt), Shift/Ctrl+right-click snap menu, Tab snap cycling | High | 4–6 |
 | U5 | Hot-grip options (Base point, Copy, Undo, Reference) are shown but ignored; multiple hot grips; multifunctional grip menus (Add/Remove Vertex, Convert to Arc) | Medium-high | 6–10 |
 | U6 | Selection keywords W, C, WP, CP, F, BOX, AU, SI, M, G; lasso (press-drag windows landed in #63); selection cycling; SELECTSIMILAR; ISOLATEOBJECTS/HIDEOBJECTS | Medium-high | 6–10 |
diff --git a/docs/ui-parity.md b/docs/ui-parity.md
index 3f6f6e29..3822a19f 100644
--- a/docs/ui-parity.md
+++ b/docs/ui-parity.md
@@ -43,15 +43,15 @@ ignored; there are no context menus. Remaining: **≈ 110–170 Opus 5.5 hours**
 | Input | AutoCAD | CADCraft | Evidence |
 |---|---|---|---|
 | `x,y[,z]`, `@dx,dy`, `@d<a`, `d<a`, `#x,y`, bare `@` | yes | yes; `#` equals absolute because there is no UCS; Z parsed then discarded | `prompt.rs:147-180` |
-| `*x,y` (WCS override) | yes | no | |
+| `*x,y` (WCS override) | yes | yes (`*x,y`, `*@dx,dy`, `@*dx,dy`); the same as the plain forms because there is no UCS | `prompt.rs` |
 | Direct distance entry | yes, honours ortho, polar and tracking paths | yes, ortho; polar only through the UI's snapped cursor | `lib.rs:782-793` |
 | Angle forms: `45d30'`, radians, grads, surveyor `N45dE` | yes | yes | `units.rs:141-197` |
 | Architectural/engineering distances `5'6-1/2"` | yes | yes | `units.rs:93-140` |
-| `FROM` (base point + offset) | yes | **no** | |
-| `M2P` / `MTP` (midpoint between two points) | yes | **no** | |
+| `FROM` (base point + offset) | yes | yes: "Base point:", "<Offset>:" with `@` measured from the base; nests with M2P and filters | `pointmod.rs` |
+| `M2P` / `MTP` (midpoint between two points) | yes | yes | `pointmod.rs` |
 | `TK` (tracking) | yes | **no** | |
-| Point filters `.x`, `.y`, `.xy`, `.z` | yes | **no** | |
-| Angle override `<45` | yes | not found | |
+| Point filters `.x`, `.y`, `.xy`, `.z` | yes | yes (`.x` … `.yz`, "(need YZ):"); Z is asked for and dropped (no 3D) | `pointmod.rs` |
+| Angle override `<45` | yes | yes: `<a`, `<<a`, `<<<a`; a typed distance or a pick follows the angle, typed coordinates win | `pointmod.rs` |
 | Typed calculator `'CAL` | yes | no | |
 
 ## Object snaps (≈ 40%)